Oreste S. Bursi

• December 2016 - August 2018: Member of the National Committee for the Habilitation process to Professor in Structural Engineering.

• January 2018: Co-founder of the Institute for Safety and Security Sciences, The University of Trento (ISSTN). Via Vigilio Inama, 5, 38122 Trento TN, Italy.

• May 2014: Co-founder of the start-up I-kubed http://www.i-kubed.com/en/ .  It was initially devoted to structural health monitoring of civil engineering buildings. In the medium term, it will be used for health monitoring of civil/mechanical infrastructure systems.

• March 2013-October 2015: Deputy head at the Department of Civil, Environmental and Mechanical and Engineering of the University of Trento.
• September 2007: defence of a Ph.D. thesis titled "Analysis of control techniques and development of numerical methods for heterogeneous simulations with dynamic substructuring" at the Department of Mechanical Engineering, University of Bristol. Best research Thesis Prize.
• February-July 2005: period of study and research at the Department of Mechanical Engineering, University of Bristol, in collaboration with David Stoten.
• July 2004: period of study and research at the École Polytechnique de Montréal, in collaboration with Prof. Robert Tremblay.
• June 2003: period of study and research at the Ecole Nationale des Ponts et Chausses LAMI Marne-La-Vallèe, in collaboration with Prof. Nelly Point.
• February 2003-February 2005: Co-ordinator of the Ph. D. Programme in Modelling, Conservation and Control of Materials and Structures at the Department of Mechanical and Structural Engineering of the University of Trento.
• November 2001-October 2006: Deputy head at the Department of Mechanical and Structural Engineering of the University of Trento.
• July 2001: Professor of Structural Dynamics and Control at the Faculty of Engineering of the University of Trento.
• August 1999: period of study and research at the Laboratoire Central des Ponts et Chausses LCPC-CNRS Marne-La-Vallèe, in collaboration with Dr. Pierre Argoul.
• February 1999: Co-designer of The Materials and Structural Testing Laboratory (LPMS), which is the largest university facility with biaxial reaction wall in Europe http://web.unitn.it/dicam/7275/materials-and-structural-testing . It has been actively used for testing of industrial components and devices.
• September 1998: Associate professor of Structural Analysis and Design at the Faculty of Engineering of the University of Trento.
• September 1995: study and research period at the Department MSM, Université de Liège in collaboration with prof. Rene Maquoi and dr. Jean-Pierre Jaspart; and at the Laboratoire de Techniques Aeronautiques et Spatiales, Université de Liège in collaboration with prof. Michel Geradin.
• September 1992 - November 1992: study and research period at the Department of Civil, Environmental and Architectural Engineering, University of Colorado at Boulder in collaboration with prof. Pui-Shum B. Shing; the collaboration continues also in the summers 1993 and 1994.
• June 1992: study and research period at the Department MS M, Université de Liège in collaboration with prof. Rene Maquoi and dr. Jean-Pierre Jaspart.
• September 1990 - October 1991: study and research period at the Department of Civil, Environmental and Architectural Engineering, University of Colorado at Boulder (under the guide of profs K. H. Gerstle and Pui-Shum B. Shing).
• July 1990: National Research Council (CNR) fellowship to spend a period of study in a foreign university.
• 1986: Assistant Professor in Structural Analysis and Design, at the Faculty of Engineering of the University of Trento.
• November 1985 - May 1986: activity both in industry and in a design office.
• May 1984, Degree in Mechanical Engineering at Padua University with the voting of 110/110 and praise.

Teaching at the Master of Science  in Energy Engineering and Civil Engineering:

• 2013-Present: Chair of Mechanics and Structural Design for Energy Engineering, University of Bolzano
• 2007-Present: Chair of Analysis and Design of Bridges, University of Trento
• 2007-Present: Chair of Seismic and Structural Engineering, University of Trento

Teaching at the PhD Course in Civil, Env. and Mechanical Engineering:

• Nonlinear analysis for Dynamic and Thermomechanical problems
• Experimental and Numerical Methods in Earthquake Engineering
• Identification and Control of Structural Systems

• December 2016 - August 2018: Member of the National Committee for the Habilitation process to Professor in Structural Engineering.

• January 2018: Co-founder of the Institute for Safety and Security Sciences, The University of Trento (ISSTN). Via Vigilio Inama, 5, 38122 Trento TN, Italy.

• May 2014: Co-founder of the start-up I-kubed http://www.i-kubed.com/en/ .  It was initially devoted to structural health monitoring of civil engineering buildings. In the medium term, it will be used for health monitoring of civil/mechanical infrastructure systems.

• March 2013-October 2015: Deputy head at the Department of Civil, Environmental and Mechanical and Engineering of the University of Trento.
• September 2007: defence of a Ph.D. thesis titled "Analysis of control techniques and development of numerical methods for heterogeneous simulations with dynamic substructuring" at the Department of Mechanical Engineering, University of Bristol. Best research Thesis Prize.
• February-July 2005: period of study and research at the Department of Mechanical Engineering, University of Bristol, in collaboration with David Stoten.
• July 2004: period of study and research at the École Polytechnique de Montréal, in collaboration with Prof. Robert Tremblay.
• June 2003: period of study and research at the Ecole Nationale des Ponts et Chausses LAMI Marne-La-Vallèe, in collaboration with Prof. Nelly Point.
• February 2003-February 2005: Co-ordinator of the Ph. D. Programme in Modelling, Conservation and Control of Materials and Structures at the Department of Mechanical and Structural Engineering of the University of Trento.
• November 2001-October 2006: Deputy head at the Department of Mechanical and Structural Engineering of the University of Trento.
• July 2001: Professor of Structural Dynamics and Control at the Faculty of Engineering of the University of Trento.
• August 1999: period of study and research at the Laboratoire Central des Ponts et Chausses LCPC-CNRS Marne-La-Vallèe, in collaboration with Dr. Pierre Argoul.
• February 1999: Co-designer of The Materials and Structural Testing Laboratory (LPMS), which is the largest university facility with biaxial reaction wall in Europe http://web.unitn.it/dicam/7275/materials-and-structural-testing . It has been actively used for testing of industrial components and devices.
• September 1998: Associate professor of Structural Analysis and Design at the Faculty of Engineering of the University of Trento.
• September 1995: study and research period at the Department MSM, Université de Liège in collaboration with prof. Rene Maquoi and dr. Jean-Pierre Jaspart; and at the Laboratoire de Techniques Aeronautiques et Spatiales, Université de Liège in collaboration with prof. Michel Geradin.
• September 1992 - November 1992: study and research period at the Department of Civil, Environmental and Architectural Engineering, University of Colorado at Boulder in collaboration with prof. Pui-Shum B. Shing; the collaboration continues also in the summers 1993 and 1994.
• June 1992: study and research period at the Department MS M, Université de Liège in collaboration with prof. Rene Maquoi and dr. Jean-Pierre Jaspart.
• September 1990 - October 1991: study and research period at the Department of Civil, Environmental and Architectural Engineering, University of Colorado at Boulder (under the guide of profs K. H. Gerstle and Pui-Shum B. Shing).
• July 1990: National Research Council (CNR) fellowship to spend a period of study in a foreign university.
• 1986: Assistant Professor in Structural Analysis and Design, at the Faculty of Engineering of the University of Trento.
• November 1985 - May 1986: activity both in industry and in a design office.
• May 1984, Degree in Mechanical Engineering at Padua University with the voting of 110/110 and praise.

LIST OF ACTIVITIES

The technical expertise of Professor Bursi spans multidisciplinary areas including earthquake analysis, risk assessment, petrochemical/oil & gas plants, industrial piping systems, probabilistic analysis and hybrid simulations.  

Some of the research areas in which Professor Bursi has recently been involved include:

1. Risk assessment of petrochemical plants under extreme loading
2. Seismic analysis of structural and industrial plant components
3. Hybrid simulations of industrial plants and structures

Professor Bursi possesses a rich publications history in international journals and conferences. It works in close collaborations with several European academic and industrial organizations by actively participating and coordinating large research projects funded by several national and International bodies including the following:

• Horizon 2020
• Research Fund for Coal and Steel (RFCS)
• JRC - European Laboratory for Structural Assessment
• Laboratories University Network of seismic engineering (ReLUIS)
• Ministero dell’Istruzione, dell’Università e della Ricerca
• Provincia autonoma di Trento – PAT
• ARCELORMITTAL Long Carbon Europe
• TenarisDalmine
• Gruppo Manni HP SpA
• Stahlbau Pichler SrL

ONGOING FUNDED PROJECT

Selected European Union Projects

• INSPIRE: Innovative ground interface concepts for structure protection. (Grant No: 813424)

Planned Duration: 48 months

Consortium: 8 European universities and 5 private companies.

Principal Investigators: Oreste S. Bursi and Davide Bigoni

Total Funding: € 3,892,123 EURO

• DISSIPABLE:  Fully Dissipative and Easily Repairable Devices for Resilient Buildings with Composite Steel-Concrete Structures. (Grant No: 800699)

Planned Duration: 36 months

Consortium: 8 participants.

Principal Investigators: Nicola Tondini and Oreste S. Bursi

Total Funding: € 907,405.82 EURO 

• SERA: Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe. (Grant No: 730900).

Planned Duration: 36 months

Consortium: 21 participants.

Principal Investigator: Oreste S. Bursi

Total Funding: € 10,000,000 EURO

• XP-RESILIENCE: Extreme loading analysis of petrochemical plants and design of metamaterial-based shields for enhanced resilience. (Grant No: 721816)

Planned Duration: 48 months

Consortium: 8 European universities and 7 private companies.

Co-ordinators and PIs: Oreste S. Bursi and Nicola Tondini

Total Funding: € 3,393,812 EURO

Selected National Projects

• RELUIS: RELUIS Information System

Duration: 2018 (12 months)

Consortium: 4 universities

Principal Investigator: Oreste S. Bursi

Budget: € 15,300 

ANNEX J - Journal Papers and Parts of Books

J1 BURSI, O. and GUZZETTI, F. "Photogrammetric Survey and Definition of Failure Mechanisms of Beam-to-Column Steel Connections", Costruzioni Metalliche, No. 5, 1990, 3-30.
J2 BURSI, O. "An Experimental-Numerical Method for the Modelling of Plastic Failure Mechanisms of Extended End-plate Steel Connections", Structural Engineering Review, No. 3, 1991, 111-119.
J3 BURSI, O.S. and GERSTLE, K.H. "The Effect of Bracing Connection Deformation on the Behaviour of Steel Frames", Costruzioni Metalliche, No. 3, 1993, 149-172.
J4 SHING, P-B-, BURSI, O.S. and VANNAN, M.T. "Pseudodynamic Tests of a Concentrically Braced Frame Using Substructuring Techniques", J. Construct. Steel Research, Voi. 29 Nos. 1-3, 1994, 121-148.
J5 BURSI, O.S. "Elastic-Plastic Modelling of Structural Fasteners in Steel Bracing Connections", J. Construct. Steel Research, Vol. 30, No. 1, 1994, 13-38.
J6 BURSI, O.S., GERSTLE, K.H., SIGFUSDOTTIR A. and ZITUR. J. "Behavior and Analysis of Bracing Connections for Steel Frames", J. Construct. Steel Research, Voi. 30, No. 1, 1994, 39-60.
J7 BURSI, O.S. and GERSTLE, K.H. "Analysis of Flexibly Connected Braced Steel Frames", J. Construct. Steel Research, Voi. 30, No. 1, 1994, 61-83.
J8 BURSI, O.S.. SHING, P.B. and RADAKOVIC-GUZINA. Z. "Pseudodynamic Testing of Strain-Softening Systems with Adaptive Time Steps", Earthquake Engineering & Structural Dynamics, Voi. 23, 1994, 745-760.
J9 SHING. P.B., NAKASHIMA, M. and BURSI, O.S., "Application of Pseudodynamic Test Method to Strnctnral Research", Earthquake Spectra, Voi. 12, No. 1, 1996, 29-56.
J10 BURSI, O.S. and SHING, P.B. "Evaluation of Some Implicit Time-Stepping Algorithms for Psendodynamic Tests", Earthquake Engineering & Structural Dynamics, Voi. 25, 1996, 333-355.
J11 BURSI, O.S. and JASPART, J.P. "Benchmark for Finite Element Modelling of Bolted Steel Connections", J. Construct. Steel Research, Voi. 43, n. 1-3, 1997, 17-42.
J12 BURSI, O.S. and JASPART, J.P. "Calibration of a Finite Element Modcl for Isolated Bolted End Plate Steel Connections", J. Construct. Steel Research. Voi. 44, n. 3, 1997, 225-262.
J13 BURSI, O.S. and JASPART, J.P. "Basic Issues in the Finite Element Simulation of Extended End Piate Connections", Computers & Structures, 69, 1998, 361-382.
J14 BURSI, O.S. and ZANDONINI, R. "Quasi-Static Cyclic and Pseudo-Dynamic Tests on Composite Substructures with Softening Behaviour" selected paper in Stability and Ductility of Steel Structures, edited by Usami and Itoh,Elsevier, 1998, 119-130.
J15 BURSI, O.S. and GRAMOLA, G. "Behaviour of Headed Stud Shear Connectors under Low-cycle High Amplitude Displacements", Materiais and Structures, 32, 1999, 290-297.
J16 BURSI, O.S. and GRAMOLA, G. "Behaviour of Composite Substructures with Full and Partial Shear Connection under Quasi-Static Cyclic and Pseudo-Dynamic Displacements", Materials and Structures, 33, 2000, 154-163.
J17 DENG, C-G., BURSI, O.S. and ZANDONINI, R."A Hysteretic Connection Element and Its Applications", Computers & Structures, 78(1-3), 2000, 93-110.
J18 BURSI, O.S. “Shear Connection in Steel-concrete Members: Testing, Modelling, Standards and Seismic Damage'', Costruzioni Metalliche, 4, 2000, 51-66.
J19 BONELLI, A., BURSI, O.S. and MANCUSO, M. "Explicit Predictor-multicorrector Time Discontinuous Galerkin Methods for Linear Dynamics", Journal of Sound and Vibration, 246(4), 2001, 625-652.
J20 ERLICHER, S., BONAVENTURA, L. and BURSI, O.S. "The Analysis of the Generalized-a Method for Non-linear Dynamic Problems", Computational Mechanics, 28, 2002, 83-104.
J21 BURSI, O.S. and MANCUSO, M. "Analysis and performance of a predictor-multicorrector Time Discontinuous Galerkin method in non-linear elastodynamics", Earthquake Engineering & Structural Dynamics 31, 2002, 1793-1814.
J22 BONELLI, A., BURSI, O.S. and MANCUSO, M. "Explicit Predictor-multicorrector Time Discontinuous Galerkin Methods for Non-linear Dynamics", Journal of Sound and Vibration, 256(4), 2002, 695-724.
J23 BURSI O. S., FERRARIO F., FONTANARI V., "Non-linear Analysis of the Low-cycle Fracture Behaviour of Isolated Tee Stub Connections". Computers & Structures, 80, 2002, 2333-2360.
J24 BONELLI, A. and BURSI, O.S., "Iterative solutions for implicit Time Discontinuous Galerkin methods applied to non-linear elastodynamics". Computational Mechanics, 30, 2003, 487-498.
J25 BURSI, O.S. and FERRARIO F., " Computational Models for the Low-cycle Fatigue Behaviour of Composite Members and Joints" in Progress in Civil and Structural Engineering Computing, Edited by B.H.V. Topping, Saxe-Coburg Publications, Stirling, 119-148, 2003.
J26 BONELLI, A. and BURSI, O.S., " Generalized-alpha Methods for Seismic Structural Testing ", Earthquake Engineering & Structural Dynamics, 33, 1067-1102, 2004.
J27 BURSI, O.S., SUN F. and POSTAL, S. "Non-linear Analysis of Steel-Concrete Composite Frames with Full and Partial Shear Connection Subjected to Seismic Loads", J. Construct. Steel Research, 61, 67-92, 2005.
J28 BURSI, O.S., VULCAN L., SALVATORE W. and NARDINI L. " Identification and Control of Structural Systems" in Progress in Computational Structures Technology, Edited by B.H.V. Topping and C.A. Mota Soares, Saxe-Coburg Publications, Stirling, 171-200, 2004.
J29 SUN, F. and BURSI, O.S., "Displacement-based and two-field mixed variational formulations for composite beams with shear lag", J. of Engineering Mechanics, ASCE , 131,2, 199-210, 2005.
J30 BONELLI, A. and BURSI, O.S., " Predictor-corrector procedures for pseudo-dynamic tests ", Engineering Computations , 22, 2005, 783-834.
J31 BALDO, G., BONELLI, A., BURSI, O.S. and ERLICHER S., " The accuracy of the Generalized-alpha method in the time integration of non-linear Single- and Two-DoF forced systems", Computational Mechanics , 38, 2006, 15-31.
J32 SALVATORE, W., BURSI, O.S. and LUCCHESI D., "Design, testing and analysis of high ductile partial strength steel-concrete composite beam-to-column joints", Computers & Structures, 83, 2005, 2334-2352.
J33 BURSI, O.S., STOTEN D.P.and VULCAN L., "Convergence and frequency-domain analysis of a discrete first-order model reference adaptive controller", Structural Control and Health Monitoring , 14, 777-807, 2007.
J34 BRACONI, A., SALVATORE, W., TREMBLAY, R. and BURSI, O.S., "Behavior and modeling of partial-strength beam-to-column composite joints for seismic applications", Earthquake engineering & structural dynamics,36, 1, 2007, 142-161.
J35 ZONTA, D., POZZI, M., and BURSI, O.S., "Performance evaluation of smart prefabricated concrete elements", Smart Structures and Systems,3, 4, 2007, 475-494.
J36 ERLICHER, S. and BURSI, O.S., "Bouc-Wen-type models with stiffness degradation: thermodynamic analysis and application", Journal of engineering mechanics, 347, 2008, 331-338.
J37 BURSI, O.S., MOLINARI, M., SAVADKOOHI, A. and ZONTA, D., "Finite Element Model Updating of a Steel-Concrete Composite Moment-Resisting Structure with Partial Strength Joints", Key Engineering Materials , 347, 101-106, 2007.
J38 BURSI, O.S., GONZALEZ-BUELGA, A., VULCAN, L., NEILD S.A. and WAGG, D. J., "Novel coupling Rosenbrock-based algorithms for real-time dynamic substructure testing", Earthquake Engineering and Structural Dynamics, 37, 339-360, 2008
J39 BONELLI, A.,BURSI, O.S., HE, L., MAGONETTE, G., PEGON, P., "Convergence analysis of a parallel interfield method for heterogeneous simulations with substructuring", International Journal for Numerical Methods in Engineering, 75, 7, 2008, 800-825.
J40 BRACONI, A., BURSI, O.S., FABBROCINO, G., SALVATORE, W., TREMBLAY, R., "Seismic performance of a 3D full-scale high-ductility steel-concrete composite moment-resisting structure - Part I: Design and testing procedure", Earthquake Engineering & Structural Dynamics , 37, 14, 2008, 1609-1634.
J41 BURSI, O.S. "Computational techniques for simulation of monolithic and heterogeneous structural dynamic systems", in Modern Testing Techniques for Structural Systems Dynamics and Control , Edited by O. S. Bursi and D. J. Wagg, CISM-Springer Wien NewYork 2008.
J42 BRACONI, A., BURSI, O.S., FABBROCINO, G., SALVATORE, W., TAUCER, F., TREMBLAY, R., "Seismic performance of a 3D full-scale high-ductile steel-concrete composite moment-resisting frame - Part II: Test results and analytical validation", Earthquake Engineering & Structural Dynamics , 37, 14, 2008, 1635-1655.
J43 Lamarche C., Bonelli A., BURSI, O.S., TREMBLAY, R., "A Rosenbrock-W method for real-time dynamic substructuring and pseudo-dynamic testing", Earthquake Engineering & Structural Dynamics , 38, 9, 2009, 1071-1092.
J44 BURSI O.S., He L., BONELLI, A., PEGON, P., "Novel generalized-alpha methods for interfield parallel integration of heterogeneous structural dynamic systems", (in print) Journal of Computational and Applied Mathematics , doi:10.1016/j.cam.2009.08.082, 2009, 1-9.
J45, Molinari M., Savadkoohi, A.T., BURSI O.S., Friswell M.I. and Zonta, D., "Damage identification of a 3D full scale steel-concrete composite structure with partial-strength joints at different pseudo-dynamic load levels", Earthquake Engineering & Structural Dynamics , 38(10), 2009, 1219-1236.
J46, Pipinato A., Molinari M., Pellegrino, C., BURSI O.S., Modena, C., "Fatigue assessment of a railway riveted steel bridge", (in print) Structure and Infrastructure Engineering , DOI: 10.1080/15732470903099776, 2009, 1-14.
J47, Pipinato A., Pellegrino, C., BURSI O.S., Modena, C., "High-cycle fatigue behavior of riveted connections for railway metal bridges", Journal of Constructional Steel Research , 65(12), 2009, 2167-2175.
J48, Savadkoohi, A., Molinari M., BURSI O.S., Friswell M.I., "Finite Element Model Updating of a Semi-Rigid Moment Resisting Structure", (in print) Structural Control and Health Monitoring , DOI: 10.1002/stc.363, 2009, 1-24
J49, BURSI O.S., Stoten D.P., Tondini N., Vulcan L., "Stability and accuracy analysis of a discrete model reference adaptive controller without and with time delay", (in print) International Journal of Numerical methods in Engineering , DOI: 10.1002/nme.2805, 2009, 1-22.
J50, Lamarche C., Tremblay R., Leger P., Leclerc M., BURSI O.S., "Comparison between real time dynamic substructuring and shake table testing techniques for nonlinear seismic applications", (in print) Earthquake Engineering and Structural dynamics , DOI: 10.1002/eqe.994, 2009, 1-22.
J51, Gracia J., Bayo E., Ferrario F., BURSI O.S., Braconi A., Salvatore W., "The seismic performance of a semi-rigid composite joint with a double-sided extended end-plate. Part I: Experimental research", Engineering Structures , 32(2), 2009, 385-396.
J52, Gracia J., Bayo E., Ferrario F., BURSI O.S., "The seismic performance of a semi-rigid composite joint with a double-sided extended end-plate. Part II: Seismic simulations", Engineering Structures , 32(2), 2009, 397-408.
J53 BURSI, O.S. Pucinotti, R. Ferrario, F. and Zandonini, R. "Post-earthquake fire resistance of steel-concrete composite beam-to-column joints: welded solutions", (in print) Costruzioni Metalliche , No. 2, 2010.
J54 Pucinotti, R., BURSI, O.S., Ferrario, F. and Zandonini, R. "Post-earthquake fire resistance of steel-concrete composite beam-to-column joints: bolted solutions", (in print) Costruzioni Metalliche , No. 3, 2010.
J55 BURSI, O.S., JIA C., VULCAN, L., NEILD S.A. and WAGG, D. J., "Rosenbrock-based algorithms and subcycling strategies for real-time nonlinear substructure testing", Earthquake Engineering & Structural Dynamics, 40, 1, 2011, 1-19.

J56 BURSI, O.S. HE L., LAMARCHE C.P. and BONELLI A., "Linearly implicit time integration methods for real-time dynamic substructure testing", Journal of Engineering Mechanics,136, 2010, 1380-1389.

J57 Jia C., BURSI, O.S., Bonelli A. and Wang Z., "Novel partitioned integration methods for DAE systems based on L-stable linearly implicit algorithms", Int. Journal for Numerical Methods in Engineering, 2011, DOI 10.1002/nme.3153

J58, Pucinotti R., BURSI O.S., Demonceau, J.-F., "Post earthquake fire and seismic performance of welded steel-concrete composite beam-to-column joints ", Journal of Constructional Steel Research , 2011, DOI: 10.1016/j.jcsr.2011.03.006

J59, Zanon G., Kumar A., BURSI O.S., Ferrario F., Giacobbe A., "High strength tubular columns and connections under earthquake, fire loading and fatigue", Metallurgia Italiana , 3, 2011, 25-31

J60, Pucinotti R., BURSI O.S., Franssen J-M., Lennon T., "Seismic-induced fire resistance of composite welded beam-to-column joints with concrete-filled tubes", Fire Safety Journal , 46, 2011, 335-347, DOI: 10.1016/j.firesaf.2011.05.003.

J61 BURSI, O.S., Ceravolo, R., Erlicher, S., Zanotti Fragonara, L., "Identification of the hysteretic behaviour of a partial strength steel-concrete moment-resisting frame structure subject to pseudo-dynamic tests", Earthquake Engineering & Structural Dynamics, 41, 14, 2012, 1883-1903.

J62 BURSI, O.S., Pucinotti, R., Zanon, G., "Design of hollow steel joints and structures" (in Italian), Flaccovio , September 2012 | ISBN: 978-88-579-0158-9.

J63 BURSI, O.S., Wang, Z. Jia, C. and Wu, B. "Monolithic and partitioned time integration methods for real time heterogeneous simulations", Computational Mechanics, 52,1, 2013, 99-119.

J64 Wu, B., Wang. Z., BURSI, O.S., "Actuator dynamics compensation based on upper bound delay for real-time hybrid simulation", Earthquake Engineering & Structural Dynamics, 42,12,2013, 1749-1765.

J65 BURSI, O.S., Ceravolo, R., Kumar, A. and Abbiati, G., Identification, model updating and validation of a steel twin deck curved cable-stayed footbridge, Computer-Aided Civil and Infrastructure Engineering, Special Issue: Health Monitoring of Structures, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, Vol. 29, No. 9, 2014.

J66 BURSI, O.S., Abbiati, G., Reza M.S., A Novel Hybrid Testing Approach for Piping Systems of Industrial Plants. Smart Structures and Systems, Vol. 16, No. 6, 2014.

J67 Wu, B., Wang. Z., BURSI, O.S., Xu, G. Yong, D. An Effective Online Delay Estimation Method Based on a Simplified Physical System Model for Real-time Hybrid Simulation, Smart Structures and Systems, 2014, Vol. 16, No. 6, 2014.

J68 Basu B., BURSI O.S., Casciati F., Casciati S., Del Grosso A., Domaneschi M., Faravelli L., Holnicki-Szulc J., Irschik H., Krommer M., Lepidi M., Martelli A., Ozturk B., Pozo F., Pujol G., Rakicevic Z., and Rodellar J., An EACS joint perspective. Recent studies in civil structural control across Europe. Structural Control and Health Monitoring, Vol. 21, No. 12, 2014, 1414-1436.

J69 Reza, M. S., BURSI, O. S., Paolacci, F. & Kumar, A. Performance of Seismically Enhanced Bolted Flange Joints for Petrochemical Piping Systems. Journal of Loss Prevention in the Process Industries. Vol. 30, 2014, 124-136.

J70 Tondini, N., BURSI, O. S., Bonelli A. and Fassin, M., Capabilities of a FBG sensor system to monitor the inelastic response of concrete sections in new tunnel linings subjected to earthquake loading, Computer-Aided Civil and Infrastructure Engineering, Special Issue: Health Monitoring of Structures, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, Vol. 30, No. 8, 2015.

J71 BURSI, O. S., Reza, M. S., Abbiati, G. & Paolacci, F. Performance-based earthquake evaluation of a full-scale petrochemical piping system. Journal of Loss Prevention in the Process Industries. Vol. 33, 2015, 10-22.

J72 Pucinotti, R., Tondini, N., Zanon, G. & BURSI, O.S., " Tests and model calibration of high strength steel tubular beam-to-column and column-base composite joints for moment-resisting structures ", Earthquake Engineering & Structural Dynamics, 2015, DOI: 10.1002/eqe.2547.

J73 BURSI, O.S., On the Advantages of Publishing in Top Ranked Academic Journals, Editorial in Computer-Aided Civil and Infrastructure Engineering, Vol. 30, No. 4, 2015.

J74 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, , Computer-Aided Civil and Infrastructure Engineering, Vol. 29, Issue 9, October 2014, Page: 643.

J75 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: O.S. Bursi, M.Q. Feng and Z. Wu, , Computer-Aided Civil and Infrastructure Engineering, Vol. 30, Issue 8, October 2015, (in print).

J76 Hasan, M.R., Farazi, F., BURSI, O.S., Reza, M.S., D’Avanzo E. “A semantic-aware data management system for seismic engineering research projects and experiments”, International Journal for Advanced Research in Artificial Intelligence, Vol. 4,4, 2015, 54-59.

J77 Abbiati, G., BURSI O.S., Caperan P., Di Sarno, L., Molina, F.J., Paolacci, F. and Pegon, P., "Hybrid simulation of a multi-span RC viaduct with plain bars and sliding bearings", Earthquake Engineering & Structural Dynamics, 2015, 44,13, 2221-2240.

J78 BURSI, O.S., Tondini, N., Fassin, M. and Bonelli A., "Structural Monitoring for the Cyclic Behaviour of Concrete Tunnel Lining Sections Using FBG Sensors", Structural Control and Health Monitoring, 2015, DOI: 10.1002/stc.1807.

J79 BURSI, O.S., Cazzador, E., Ussia, A., " Probabilistic analysis of a twin deck curved cable-stayed footbridge subjected to multiple inputs and corrosion ", Engineering Structures, 105, 15, 2015.

J80 BURSI, O.S., Paolacci, F., Reza, S., Alessandri, S., Tondini, N., " Seismic Assessment of Petrochemical Piping Systems Using a Performance-Based Approach ", Journal of Pressure Vessel Technology, 138(3), 2016, 10 pp, doi: 10.1115/1.4032111.

J81 Carta, G., Movchan, A.B., Argani, L.P., BURSI, O.S., “Quasi-periodicity and multi-scale resonators for the reduction of seismic vibrations in fluid-solid systems”, International Journal of Engineering Science, 109, 2016, 216–239.

J82 Xu, G., Wang, Z., Wu, B., BURSI, O.S., Tan, X., Yang, Q., Wen, L., Jiang, H., “Pseudo-dynamic tests with substructuring of a full-scale precast box-modularized structure made of reinforced concrete shear walls”, The Structural Design of Tall and Special Buildings, DOI: 10.1002/tal.1354, 2017

J83 BURSI, O.S., D’Incau, M., Zanon, G., Raso, S., Scardi, P., “Laser and mechanical cutting effects on the cut-edge properties of steel S355N”, Journal of Constructional Steel Research, 133, 2017,181-191.

J84 Phan Nam H., Paolacci, F., BURSI, O. S., Tondini, N. “Seismic Fragility Analysis of Elevated Steel Storage Tanks Supported by Reinforced Concrete Columns”, Journal of Loss Prevention in the Process Industries. 47, 2017, 57-65.

J85 BURSI O.S., Abbiati G., Cazzador, E., Pegon, P. and Molina, F.J., " Nonlinear heterogeneous dynamic substructuring and partitioned FETI time integration for the development of low-discrepancy simulation models", International Journal for numerical Methods in Engineering, DOI: 10.1002/nme.5556, 2017.

J86 Xu, G., Wang, Z., Wu, B., BURSI, O.S., Tan, X., Yang, Q., Wen, L., Jiang, H., “Seismic Performance of Precast Shear Wall with Sleeves Connection Based on Experimental and Numerical Studies”, Engineering Structures, (in print), 2017.

J87 Mei, Z., Wu, B., BURSI, O.S., Yang, G., Wang Z., "Hybrid simulation of structural systems with online updating of concrete constitutive law parameters by unscented Kalman filter", Structural Control and Health Monitoring, (in print), 2017. DOI:10.1002/stc.2069.

J88 Wang, Z., Wu, B., Xu, G., BURSI, O.S., "An Improved Equivalent Force Control Algorithm for Hybrid Seismic Testing of Nonlinear Systems", Structural Control and Health Monitoring, (in print), 2017.

J89 Abbiati G., La Salandra, V. BURSI O.S., Caracoglia L., " A Composite Experimental Dynamic Substructuring Method Based on Partitioned Algorithms and Localized Lagrange Multipliers", Mechanical Systems and Signal Processing, 100, 1, 2018, 85-112.

J90 Beltempo A., BURSI, O.S., Cappello, C., Zonta, D. and Zingales, M., A viscoelastic model for the long-term deflection of segmental prestressed box girders, Computer-Aided Civil and Infrastructure Engineering, Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, DOI:10.1111/mice.12333, Vol. 33, No. 1, 2017.

J91 BURSI, O. S., di Filippo R., La Salandra, V., Pedot, M. Reza, Md S., “Probabilistic seismic analysis of an LNG subplant”, Journal of Loss Prevention in the Process Industries, Special Issue on Risk Analysis in the Process Industries: State-of-the-art and the Future, Vol. 53, 2018, 45-60.

J92 La Salandra, V., Wenzel, M., BURSI, O. S., Carta G., Movchan, A.B., “Conception of a 3D Metamaterial-Based Foundation for Static and Seismic Protection of Fuel Storage Tanks, Frontiers in Materials, 4, 30, October 2017, doi: 10.3389/fmats.2017.000302018.

J93 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, Computer-Aided Civil and Infrastructure Engineering, DOI:10.1111/mice.12333, Vol. 33, Issue 1, 2018.

J94 Beltempo A., Zingales, M., BURSI, O.S. and Deseri, L., A fractional-order model for aging materials: an application to concrete. International Journal of Solids and Structures, 2018, (in print).

J95 Caputo, A., C., Paolacci, F., BURSI, O.S., Giannini, R., " Problems and perspectives in seismic Quantitative Risk Analysis of chemical process plants", Journal of Pressure Vessel Technology, 2019, 141(1):010901-010901-15. PVT-17-1245, doi: 10.1115/1.4040804.

J96 Tondini, N., Zanon, G., Pucinotti, R., Di Filippo, R. & BURSI, O.S., "Seismic performance and fragility functions of a 3D steel-concrete composite structure made of high-strength steel", Engineering Structures, 174, 1, 2018, 373-383. https://doi.org/10.1016/j.engstruct.2018.07.026

J97 Abbiati, G., Cazzador, E., Alessandri, BURSI, O.S.,  Paolacci, F., De Santis, S., “Experimental characterization and component-based modeling of deck-to-pier connections for composite bridges”, Journal of Constructional Steel Research, 150, November 2018, 31-50. https://doi.org/10.1016/j.jcsr.2018.08.005

J98 Basone, F., Wenzel, M., BURSI O.S., Fossetti, M., " Finite locally resonant metafoundations for the seismic protection of fuel storage tanks", Earthquake Engineering & Structural Dynamics, First published: 8/11/2018 https://doi.org/10.1002/eqe.3134.

J99 Zanon, G., BURSI, O.S., Scardi, P., D’Incau, M., Raso, S., “High-cycle Fatigue Behaviour of S460N Steel Grade Materials and Bolted Joints Processed by Laser Cutting”, The Open Construction and Building Technology Journal, DOI: 10.2174/1874836801812010083, 13, 2019.

J100 Mei, Zhu, Wu, Bin, BURSI O.S., Xu, G., Wang, Z., Wang, T., Ning, X., " Hybrid simulation with online model updating: application to a reinforced concrete bridge endowed with tall piers", Mechanical Systems and Signal Processing, 123, May 2019, 533-553, https://doi.org/10.1016/j.ymssp.2019.01.009

J101 Sayginer, O., Chiasera, A., Zur, L., Varas, S., Tran, Lam., Armellini, C., Ferrari, M. and BURSI, O.S.," Fabrication, Modelling and Assessment of Hybrid 1-D Elastic Fabry Perot Microcavity for Mechanical Sensing Applications", Ceramics International, January, 2019. https://doi.org/10.1016/j.ceramint.2019.01.083

J102 Sun, Feifei., Xiao, Lei. & BURSI, O.S., " Optimal design and novel configuration of a locally resonant periodic foundation (LRPF) for seismic protection of fuel storage tanks", Engineering Structures, 189, 15, 2019, 147-156. https://doi.org/10.1016/j.engstruct.2019.03.072

J103 Abbiati, G., Lanese, I., Cazzador, E., BURSI, O.S., Pavese, A. " A Computational Framework for Fast-Time Hybrid Simulation Based on Partitioned Time Integration and State-Space Modeling", Structural Control and Health Monitoring, (in print), 2019

J104 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, Computer-Aided Civil and Infrastructure Engineering, DOI:10.1111/mice.12386, Vol. 33, Issue 9, 2018.

J105 BURSI, O.S., Introduction to the Special Issue: Health Monitoring of Structures, Guest Editors: J.L. Beck, O.S. Bursi and M. Kurata, Computer-Aided Civil and Infrastructure Engineering, DOI:10.1111/mice.12483, Vol. 34, Issue 9, 2019, (in print).

J106 Wenzel, M., Basone, F., BURSI, O.S., " Design of a Metamaterial-Based Foundation for Fuel Storage Tanks and Experimental Evaluation of its Effect on a Connected Pipeline System", Journal of Pressure Vessel Technology, 2019, (in print)

In summary: 106 papers published, 95 of which published in international journals, 6 in national journals, 4 on books, 1 book.

ANNEX R - Reports
Rl BURSI, O. e MODENA, C. "Valutazione di Caratteristiche Spettrali, di Durata e Intensità di Accelerogrammi: Metodologia, Programma di Calcolo e Applicazioni a Registrazioni del Frinii (1976) e dell'Irpinia (1980)", Internal Report 6/88, Istituto di Scienza e Tecnica delle Costruzioni Università di Padova, September, 1986.
R2 BAREL, S., BERNARDINI, A-, BURSI, O. e MODENA, C. "Analisi Stocastica della Risposta di Sistemi Lineari ad Eccitazioni Sismiche a più Componenti in Regime Stazionario e Transitorio - Metodologia e Programma di Calcolo" Internal Report, Istituto di Scienza e Tecnica delle Costruzioni Università di Padova, December, 1986.
R3 BURSI, O. "Determinazione dei Domini di Stato Limite di Travi con Vincoli d'Estremità Cedevoli e Rappresentazione del Comportamento di Giunti Trave-Colonna in Acciaio" Internal Report, Dipartimento di Ingegneria, Università di Trento, March, 1987.
R4 BURSI, O. "Tests and Modeling of Bolted Double Clip Angles ofSteel Bracing Con-nections", Internal Report, Dipartimento di Meccanica Strutturale e Progettazione Automatica, Università di Trento, October, 1990.
R5 BURSI, O. "Behaviour and Modelling of Semi-Rigid Beam-to-Column Steel Joints", Contratto SPRINT RA 351, Technical Report N. 2, October, 1992.
R6 BURSI, O.S. e altri "Collegamenti Semirigidi nelle Costruzioni in Acciaio", Con­tratto SPRINT RA 351 bis, Final Report, October, 1995.
R7 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca 28.01.98 (Classified), Intermediate Results, October, 1998.
R8 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca Riservato 28.01.98 bis, Intermediate Results, December, 1998.
R9 BURSI, O.S., BONELLI, A. e LEONELLI, L. "Analisi Strutturale Termomeccanica su Suscettore di 20" in Grafite e Composito di Carbonio", Contratto di Ricerca Riservato 28.01.98 bis, Final Results. March, 1999.
R10 SUN, F. and BURSI, O.S. "Displacement-based and Mixed Formulations for Steel-concrete Composite Beams with Shear Lag", Internal Report, N. 21, Dipartimento di Ingegneria Meccanica e Strutturale, Università di Trento, December, 2002.
R11 BONELLI, A. and BURSI, O.S. " Seismic qualification of cast-in channels and shear connector devices between steel and concrete", Contract No. HPRI-CT-1999-40006. Cooperative advancements in seismic and dynamic experiments - EUROPEAN UNION, September, 2003.
R12 BURSI, O. S. , Caramelli S., Fabbrocino G., Molina J., Salvatore W., Taucer F., "3-D Full-scale Seismic Testing of a Steel-concrete Composite Building at Elsa", Contr. No: HPR-CT-1999-00059, Eur Report 21299 EN , 2004.
R13 BURSI, O. S. , Molina J., Salvatore W., Taucer F., "Dynamic characterization of a 3-D full scale steel-concrete composite building at ELSA", Contr. No: HPR-CT-1999-00059, Eur Report 21206 EN , 2004.
R14 Plumier, A., Castiglioni, C., Calado, L., BURSI, O. S., Vayas, I., Demarco, T., "Two Innovations for Earthquake Resistant Design" Final Report, The INERD project, CEC Agreement No. 7210-PR-316, Research Fund for Coal and Steel - European Union ., 2004.
R15 BURSI, O. S. , COLOMBO A.,"Prefabricated Composite Beam-to-Column Filled Tube or Partially Reinforced-Concrete Encased Column Connections for Severe Seismic and Fire Loadings", Mid-Term Report, PRECIOUS Project, Contr. No: RFS-CR-03034, Research Fund for Coal and Steel , 2006.
R16 BURSI, O. S. , et. al.,"Prefabricated Composite Beam-to-Column Filled Tube or Partially Reinforced-Concrete Encased Column Connections for Severe Seismic and Fire Loadings", Final Report, PRECIOUS Project, Contr. No: RFS-CR-03034, Research Fund for Coal and Steel , 2008.
R17 BURSI, O. S. , Dusatti T., Pucinotti R., "A Reconnaissance report. The April 6, 2009, L’Aquila Earthquake. Italy", Report, http://www.reluis.it, 2009.
R18 BURSI, O. S. , Kumar A. et. al., "Design and Integrity Assessment of High Strength Tubular Structures for Extreme Loading Conditions" Mid-Term Report, HITUBES Project, Contr. No: RFSR-CT-2008-00035, Research Fund for Coal and Steel , 2010.
R19 Jaspart J-P., Demonceau J-F., BURSI, O. S. , et. al., "Performance-based approaches for high strength tubular columns and connections under earthquake and fire loadings" Mid-Term Report, ATTEL Project, Contr. No: RFSR-CT-2008-00037, Research Fund for Coal and Steel , 2010

R20 Karamanos, S. BURSI, O. S. et al., "Structural safety of industrial steel tanks, pressure vessels and piping systems under seismic loading" Mid-Term Report, INDUSE Project, Contr. No: RFSR-CT-2009-00022, Research Fund for Coal and Steel , 2011.

R21 BURSI, O. S. et al., "Report on the Whole Simulation Tests and the Calibration and Validation of the Theory of Seismic Failure" Deliverable Report, MONICO Project, "Fibre Optics-Based Intelligent Monitoring and Assessment System for Proactive Maintenance and Seismic Disaster Prevention in Reinforced Concrete Tunnel Linings", Contr. No: FP7 – SME – 2007 – 1, Research for SMEs, 2011.

R22 BURSI, O.S., Ferrario F, Pucinotti R., Tondini N. and Zandonini R. "Test and analysis of structures and joints for steel-concrete moment-resisting frames and steel-concrete box-girder bridges", Deliverable Report, RELUIS Project, "The development of innovative approaches for the design of steel and composite steel-concrete structural systems", Line 5 of the RELUIS-DPC 2005-2008 project. Mazzolani F.M. and Zandonini R., Editors. Doppiavoce, Napoli. 2011.

R23 BURSI, O. S., Kumar A. et al., "Design and Integrity Assessment of High Strength Tubular Structures for Extreme Loading Conditions", Final Report, HITUBES Project, Contr. No: RFSR-CT-2008-00035, Research Fund for Coal and Steel , 2011.

R24 , Jaspart J-P., Demonceau J-F., BURSI, O. S. et al., "Performance-based approaches for high strength tubular columns and connections under earthquake and fire loadings" Final Report, ATTEL Project, Contr. No: RFSR-CT-2008-00037, Research Fund for Coal and Steel , 2011.

R25 , Fardis M., BURSI, O. S. et al., " Seismic Engineering Research Infrastructures for European Synergies" Final Report, SERIES Project, Contr. No: 227887, Capacities Specific Programme Research Infrastructures.

R26 , Paolacci F., BURSI, O. S. et al., "3-D Assessment of the seismic vulnerability of an old RC viaduct with frame piers and study of the effectiveness of base isolation through PsD testing (RETRO)”, Eur Report 26471 EN , 2014. JRC., European Union.

R27 BURSI, O. S., Reza S. et al., "Component Fragility Evaluation, Seismic Safety Assessment and Design of Petrochemical Plants Under Design-Basis and Beyond-Design-Basis Accident Conditions”, Mid-Term Report, INDUSE-2-SAFETY Project, Contr. No: RFS-PR-13056, Research Fund for Coal and Steel , March, 2016.

R28 BURSI, O. S., Di Filippo R. et al., "Component Fragility Evaluation, Seismic Safety Assessment and Design of Petrochemical Plants Under Design-Basis and Beyond-Design-Basis Accident Conditions”, Final Report, INDUSE-2-SAFETY Project, Contr. No: RFS-PR-13056, Research Fund for Coal and Steel, April, 2018.

R29 BURSI, O. S., Tondini N. et al., " Extreme Loading Analysis of Petrochemical Plants and Design of Metamaterial-based Shields for Enhanced Resilience”, Mid-term Report, XP-RESILIENCE Project, Project. No: 721816, H2020-EU.1.3.1. - Fostering new skills by means of excellent initial training of researchers, August, 2018.

R30 BURSI, O. S., Covi P. et al., "Enhanced HDS due to order reduction, reduced epistemic uncertainties and complementary use of offline dynamic substructuring methods”, Deliverable D27.1, SERA Project, Project. No: 730900, H2020-EU – Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe, January, 2019.

In summary: 30 reports published. 6 internal reports; 18 reports for contracts with the European Union and 6 reports for contracts with industry.

Member of WG 13: Seismic assessment, design and resilience of industrial facilities. European Association for Earthquake Engineering.

Member of COST ACTION F3 - Structural Dynamics; Member of COST ACTION C-12 - Improving buildings' structural quality by new technologies; Member of ICONS (Innovative seismic design Concepts for New and existing Structures).

• In 2015, Certificate of Appreciation awarded by the Pressure Vessels & Piping Division of ASME for Tutorial on "Assessment/Design of Petrochemical Piping Systems and Components Located in Earthquake-Prone Zones", at the 2015 ASME Pressure Vessels & Piping Conference, Boston, Massachusetts. 
• In 2007,  Best research PhD Dissertation, Faculty of Engineering, University of Bristol, (UK). 
• In 1999, Fellowship awarded by “COST ACTION F3 - Structural Dynamics” for a research period at LCPC-CNRS Marne-La-Vallée with Dr. Pierre Argoul (F). 
• In 1991, Fellowship from the U. of Colorado at Boulder for collaboration with B. Shing (USA). 
• In 1990, National Research Council fellowship for a stay at the U. of Colorado at Boulder (USA).

CI BAREL. S., BERNARDINI, A., BURSI, O. and MODENA, C. "Transient Response of Three-Dimensional Linear Structures to Stochastic Seismic Excitations", Proc. ICASP 5, Vancouver, Canada, May, 1987.
C2 BURSI, O., ZANDONINI, R. e ZANON R, "Comportamento di Giunti Trave-Colonna e sua Influenza sul Dimensionamento della Trave", XI Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 25-27 Ottobre, Trieste, 1987.
C3 BURSI, O., MODENA, C. and TOMAZEVIC, M. "Experimental and Numerical Study of Seismic Behaviour of a Mixed R/C and Reinforced Masonry Three-Storeyed Building Structure", Proc 8th Int. Brick/Block Masonry Conference, Ireland, 1988.
C4 BURSI, O.. ZANDONINI. R. and ZANON, P., "Design of Beams in Partially Re-strained non Sway Frames", Int. Colloquuim on Bolted and Special Structures Con-nections, Moscow, USSR, May 15-20, 1989.
C5 BURSI, O., ZANDONINI, R. and ZANON, P. "Analysis and Design of Partially Restrained Beams", Poster Session, National Steel Construction Conference, Nashville, Tennessee, USA, June 21-24, 1989.
C6 BURSI, O.. ZANDONINI, R. e ZANON, P. "Analisi e Progetto agli Stati Limite di Travi con Collegamenti Semi-rigidi", XII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, Capri, 22-25 Ottobre, Capri, 1989.
C7 BURSI, O. "Analisi Sperimentale del Comportamento di Bulloni ad Alta Resistenza in Collegamenti Flangiati", XII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 22-25 Ottobre, Capri, 1989.
C8 BURSI, O. "An Experimental-Numerical Method for the Modelling of Plastic Failure Mechanisms of Extended End-plate Steel Connections", Proc. of thè First Int. Conf. on Computational Structures Technology, 20th-22nd August, 1991.
C9 BURSI, O. "La Modellazione Elasto-plastica di Giunti di Controvento in Acciaio". XIII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 27-30 Otto bre, Abano Terme, 1991.
C10 BURSI, O. and GERSTLE, K.H. "The Effect of Bracing Connection Deformations on the Behavior of Braced Steel Frames", XIII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 27-30 Ottobre, Abano Terme, 1991.
C11 BURSI, O.S., GERSTLE, K.H. and SHING, P.B. "Analysis and Tests of a Partially Restrained Braced Frame Subjected to Seismic Loadings", Proc. of the Tenth World Conference on Earthquake Engineering, Madrid, July 19-24, 1992.
C12 BURSI, O.S. "Modelli Costitutivi per Elementi Finiti Interfaccia in Collegamenti di Acciaio" XI Congresso Nazionale AIMETA, Trento, 28 Settembre - 2 Ottobre, 1992.
C13 BURSI, O.S., GERSTLE, K.H. and SHING, P.B. "Response of a Braced Steel Frame to Seismic Actions: Numerical Simulation and Experimental Verification", Proc. of the First World Conf. on Constructional Steel Design, Acapulco, December 6-9, 1992.
C14 BURSI, O.S. "Un Algoritmo di Integrazione al Passo Accelerato per Analisi di Tipo Pseudodinamico", VII Convegno Italiano di Meccanica Computazionale AIMETA, Trieste, 1-3 Giugno, 1993.
C15 SHING, P.B., BURSI, O.S.. GUZINA, Z. and VANNAN, M.T. "Recent Developments in Pseudodynamic Testing Based on an Implicit Time Integration Method", U.S.-Japan Seminar on Developments and Future Dimensions of Structural Testing Techniques, Hawaii 28 June-1 July, 1993.
Cl6a BURSI, O. "Application of the Pseudodynamic Test Method to Steel-Concrete Composite Structures", I.o Workshop Italiano sulle Strutture Composte, 17-18 Giugno, Villa Madruzzo, Trento, 1993.
Cl6b BURSI, O. "Application of the Pseudodynamic Test Method to Steel-Concrete Composite Strnctures", XIV Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 24-27 Ottobre, Viareggio, 1993.
C17 BURSI, O.S. e SHING P.B., "Recenti Sviluppi sul Metodo di Prova Pseudodi­namico", Sesto Convegno Nazionale - L'Ingegneria Sismica in Italia, 13-15 Ottobre, Perugia, 1993.
Cl8a BURSI, O.S. and LEONELLI, L. "A Finite Element Model for the Rotational Behavior of End Plate Steel Connections", Proc. 50th Anniversary Conference, SSRC, June 20-22, Bethlehem, 1994
Cl8b BURSI, O.S. and LEONELLI, L. "A Finite Element Model for the Rotational Behaviour of End Plate Steel Connections", Proc. of the Second State of the Art Workshop COST CI, October 26-28, Prague, 1994.
C18c BURSI, O. e LEONELLI, L. "Semi-analytical and Finite Element-based Models for the Rotational Behaviour of End Plate Steel Connections", XIV Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 24-27 Ottobre, Viareggio, 1993.
C19 BURSI, O.S. and SHING, P.B. "Evaluation of Implicit Time-stepping Algorithms for Pseudodynamic Tests", Atti del Workshop sul Danneggiamento, Prove Cicliche e Pseudodinamiche, 2-3 Giugno, Napoli, 1994.
C20 BURSI, O.S. and SHING, P.B. "Error Effects in Predictor-Corrector Algorithms for Pseudodynamic Tests", Int. Workshop and Seminar on the Behaviour of Steel Structures in Seismic Areas, STESSA '95, June 26- July 1, Timisoara, Romania, 1994.
C21 BURSI, O.S. and SHING, P.B. "Adaptive Time Steps and Secant-Newton Iterations for Pseudodynamic Testing of Strain-Softening Structures", Proc. of the 5th U.S. National Conference on Earthquake Engineering, July 10-14, Chicago, 1994.
C22 BURSI, O.S., SHING, P.B. and ZANDONINI, R. "Pseudodynamic Analysis of Semi-Rigid Composite Structures with Softening Behavior", Proc. of the Eng. Mechanics Conf. ASCE, May 21-24. Boulder, Colorado 1995.
C23a BALLERINI, M-, BURSI, O. e ZANDONINI, R. "Comportamento di Sottostrutture Composte Acciaio-Calcestruzzo con Connessione Parziale e Completa Soggette ad Azioni Cicliche", 2o Workshop Italiano sulle Strutture Composte, 22-23 Giugno, Napoli, 1995.
C23b BALLERINI, M. e BURSI, O. "Experimental Analysis of Steel-concrete Composite Beams with Full and Partial Shear Connections", XV Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 15-18 Ottobre, Riva del Garda, 1995.
C24a BURSI, O.S. and ZANDONINI, R. "A Numerical Validation Study for Pseudodynamic Analysis of Semi-Rigid Composite Sway Frames", Proc. Int. Conf. on Structural Stability and Design, October 30 - November 1, Sydney, Australia, 1995.
C24b BURSI, O. e ZANDONINI, R. "A Numerical Validation Study for Pseudody-namic Analysis of Semirigid Composite Sway Frames", XV Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 15-18 Ottobre, Riva del Garda, 1995.
C25a BURSI, O. e JASPART, J.P. "A Refined Finite Element Model for Tee-stub and End-piate Steel Connections", XV Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 15-18 Ottobre, Riva del Garda, 1995.
C25b BURSI, O.S. and JASPART J.P., "Finite Element Based-models for the Analysis of Bolted Beam-to-column Steel Connections", IABSE Int. Colloquium on Semi-Rigid Structural Connections, September 25-27, Istanbul, Turkey, 1996.
C26 BURSI, O.S. e MANCUSO, M. "Integratori alle Differenze Finite ed a Fonda­mento Variazionale per Analisi di Tipo Pseudodinamico" XII Congresso Nazionale AIMETA, Napoli, 3-6 Ottobre, 1995.
C27a BURSI, O.S. and BALLERINI M. "Analysis and Behaviour of a Steel-Concrete Composite Substructure with Full and Partial Shear Connection", Proc. of the Third European Conference on Structural Dynamics, Eurodyn'96, June 5-8, Firenze, 1996.
C27b BURSI, O.S. and BALLERINI M. "Behaviour of a Steel-Concrete Composite Substructure with Full and Partial Shear Connection", Proc. of the Eleventh Worid Conference on Earthquake Engineering, June 23-28, Acapulco, 1996.
C28 BURSI, O.S. e BALLERINI, M. "Prove Cicliche Quasi Statiche e Pseudodinamiche su Sottostrutture Composte Acciaio-Calcestruzzo con Connessione Parziale e Completa", 11° Congresso CTE sulla Nuova Tecnologia Edilizia per l'Europa, 7-9 Novembre, Napoli, 1996.
C29 BURSI, O.S. e BALLERINI, M. "Comportamento Oligociclico di Campioni Pull-push di Acciaio-Calcestruzzo con Collegamenti a Taglio", Ottavo Convegno Nazionale - L'Ingegneria Sismica in Italia, 21-24 Settembre, Taormina, 1997.
C30 BURSI, O.S. e MANCUSO, M. "Il Metodo Time-Discontinuous Galerkin appli­cato a Sistemi Dinamici non Lineari" XIII Congresso Nazionale AIMETA, Siena, 29 Settembre-3 Ottobre, 1997.
C31a BURSI, O.S. and GRAMOLA, G. "Seismic Performance of Composite Substructures with Full and Partial Shear Connections", SSRC, Annual Technical Session & Meeting, June 9-11, Toronto, 1997.
C31b BURSI, O.S., GRAMOLA, G. and ZANDONINI, R. "Quasi-static Cyclic and Pseudo-dynamic Tests on Composite Substructures with Softening Behaviour", Int. Conference on Stability and Ductility of Steel Structures, July 29-31, Nagoya, Japan, 1997.
C31c BURSI, O. BALLERINI, M. and GRAMOLA. G. "Seismic Performance of Composite Substructures with Full and Partial Shear Connection", XVI Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 2-5 Ottobre, Ancona, 1997.
C32 BURSI, O.S. and GRAMOLA, G. "Smeared crack analysis of steel-concrete com­posite Substructures", Int. Workshop and Seminar on the Behaviour of Steel Struc­tures in Seismic Areas, STESSA '97, August 3-8, Kyoto, Japan, 1997.
C33 BURSI, O.S., BALLERINI, M., NEMATI, N and ZANDONINI, R. "Quasi-static Monotonic and Low-cycle Behaviour of Steel Isolated Tee Stub Connections", Int. Workshop and Seminar on the Behaviour of Steel Structures in Seismic Areas, STESSA '97, August 3-8, Kyoto, Japan, 1997.
C34a BURSI, O.S. and ZANDONINI, R. "Low-cycle Behaviour of Isolated Bolted Tee stubs and Extended End Plate Connections", SSRC, Annual Technical Session & Meeting, June 9-11, Toronto, 1997.
C34b BURSI, O. and GALVANI, M. "Low Cycle Behavior of Isolated Bolted Tee Stubs and Extended End Plate Connections", XVI Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 2-5 Ottobre, Ancona, 1997.
C35 ZANDONINI, R., BERNUZZI, C. and BURSI, O.S. "Steel and Steel-concrete Composite Joints Subjected to Seismic Actions", Int. Workshop and Seminar on the Behaviour of Steel Structures in Seismic Areas, STESSA '97, August 3-8, Kyoto, Japan,1997.
C36 BURSI, O.S. and BALLERINI M. "Low-cycle Behaviour and Analysis of Steel-concrete Composite Substructures", Proc. Int. Conf. on Composite Construction -Conventional and Innovative, IABSE, September 16-18, Innsbruck, Austria, 1997.
C37 BONELLI, A. and BURSI, O.S. "The Time-Discontinuous Galerkin Method applied to Non-Linear Elastodynamics", Proc. of the 12471 Eng. Mechanics Conf. ASCE, May 17-20, San Diego, California, 1998.
C38 DENG, C-G., BURSI, O.S. and ZANDONINI, R. "Analysis of Moment Resisting Steel Connections under Reversed Cyclic Loading",.Proc. of the Fourth Int. Conference on Computational Structures Technology, August 18-20, Edinburgh, 1998.
C39 BURSI, O.S., CALDARA, R. and ZANDONINI, R. "Low-cycle fatigue behaviour and finite element-based simulations of composite substructures with partial shear connections", 3.o Workshop Italiano sulle Strutture Composte, 29-30 Ottobre, An­cona, 1998.
C40 BONELLI, A., BURSI, O.S. and MANCUSO M. "The Generalized-a Method Applied to Conservative Duffing Oscillators", Proc. of the Fourth European Conference on Structural Dynamics, Eurodyn'99, June 6-10, Prague, 1999.
C41 BONELLI, A., BURSI, O.S. and ERLICHER S. "Analisi ed Applicazioni di Integratori Dissipativi in Elastodinamica non Lineare", Atti del convegno "9° Convegno nazionale "L'Ingegneria Sismica in Italia, ANIDIS 99, Settembre 20-23, Torino, 1999.
C42 BURSI, O., LASTA, R.and ZANDONINI, R. "Experimental and numerical analy-sis of the low-cycle fracture behaviour of steel connections", XVII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 3-7 Ottobre, Napoli, 1999.
C43 BURSI, O.S. and CALDARA, R. "Composite Substructures with Partial Shear Connection: Low-Cycle Fatigue Behaviour and Analysis Issues", Proc. of the Twelfth Worid Conference on Earthquake Engineering, January 30- February 4, Auckiand, 2000.
C44 ZANDONINI, R. and BURSI, O.S. "Cyclic behavior of headed stud shear connectors", Proc. of the Fourth Conference on Composite Construction in Steel and Concrete, May 28- June 2, Banff, Alberta, 2000.
C45 BURSI, O.S. and ZANDONINI, R. "Non-linear analysis of full and partial shear connection composite substructures", Proc. of the Fourth Conference on Composite Construction in Steel and Concrete, May 28- June 2, Banff, Alberta, 2000.
C46 ZONTA, D., MODENA, C. and BURSI, O. S. "Analysis of dispersive phenomena in damaged Structures", Proc. of the European COST F3 Conference on System Identification & Structural Health Monitoring, June 6- 9, Madrid, 2000.
C47 BURSI, O.S., FERRARIO, F. and FONTANARI, V. ``Non-linear Analysis of the Low-cycle Fracture Behaviour of Bolted Steel Connections'', Proc. of the Fifth Int. Conference on Computational Structures Technology, September 6-8, Leuven, 2000.
C48 BURSI, O.S., and ZANDONINI, R. "Behaviour of Steel-Concrete Composite Substructures with Partial Shear Connection and Column Web Panel Yielding",.Proc. of the Fifth Int. Conference on Steel and Composite Structure, June 14-16, Pusan, Korea, 2001.
C49 BONELLI, A., BURSI, O.S., SVALDI, A. and ZONTA, D. "A Predictor-Corrector alpha-Method Applied to Pseudo-Dynamic Tests", Proc of the COST-F3 Conf. on Structural System Identification, September 5-7, Kassel, DE, 2001.
C50 ARGOUL, P., BURSI, O.S., ERLICHER, S. and POINT, N. "Modelling and Identification of the Degrading Hysteretic Behaviour of Steel-Concrete Shear Connectors", Proc of the COST-F3 Conf. on Structural System Identification, September 5-7, Kassel, DE, 2001.
C51 ERLICHER, S., BURSI, O.S. and ZANDONINI, R. "Low-cycle Fatigue Behaviour of Pull-push Specimens with Headed Stud Shear Connectors",.Symposium on Connections between Steel and Concrete, RILEM, September 9-12, Stuttgart, 2001.
C52 BONELLI, A., BURSI, O.S. SVALDI, A. and ZONTA, D. "Un Metodo a-Generalizzato Predictor-Corrector Applicato alla Sperimentazione Pseudodinamica", Atti del convegno "10° Convegno nazionale "L'Ingegneria Sismica in Italia, ANIDIS 2001, Settembre 9-12, Potenza, 2001.
C53 BURSI, O., PILUSO V., RIZZANO, G. and ZANDONINI, R. "Modelling of the Cyclic Behaviour of Bolted T-Stubs Subjected To Variable Amplitude Loading", XVIII Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 26-28 Settembre, Venezia, 2001.
C54 ZANON, P., BURSI, O., ERLICHER, S, ZONTA D., CLEMENTE P.and INDIRLI M. "Intervention Scenarios on the Basilica of San Gaudenzio Dome in Novara", 7 ^th International Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, October 2-5, Assisi, 2001.
C55 ZONTA, D., CERAVOLO, R., BURSI, O. S., ERLICHER, S., ZANON, P. and DE STEFANO A., "Issues on Vibration-based Identification of Complex Monumental Structures: the Dome of S. Gaudenzio Church in Novara". 3rd World Conf. on Structural Control", Como, April, 7-12, 2002.
C56 BURSI O. S., BALLERINI M., PIAZZA M., ZANDONINI R., FOURNELY E., KUHLMANN U., KÜRSCHNER K., SCHÄNZLIN J., "Shear transfer in composite members: testing, modelling, standards and damage". COST C-12, Lisbon, 19-20 April, 2002
C57 BONELLI, A., BURSI, O.S., ERLICHER, S. and VULCAN, L. "Analyses of the Generalized-alpha Method for Linear and Non-linear Forced Excited Systems". "EURODYN 2002", MUNICH, September, 2002.
C58 BURSI, O.S., ARIBERT, J.M. and LACHAL, A. " Energy-based Damage Models in Seismic Analysis of Steel-Concrete Composite Members". The Twelfth European Conference on Earthquake Engineering, London, September, 2002
C59 ZANDONINI, R. and BURSI, O.S., " Monotonic and Hysteretic Behaviour of Bolted End Plate Beam-to-column Joints". Proc. of the Third International Conference on Advances in Steel Structures, Hong Kong, 9-11 December, 2002. China.
C60 SUN, FEIFEI e BURSI, O.S.,"A displacement-based formulation for steel-concrete composite beams with shear lag". Atti del convegno "EURO-C 2003 Computational Modelling of Concrete Structures", S. Johann i Pongau, 17-20 March, 2003.
C61 BURSI O. S., BRACONI A., FERRARIO F., e SALVATORE W., "Seismic Design of Beam-to-Column Connections for Steel-Concrete Composite Moment Resisting Frames". Atti del convegno "STESSA 2003. Behaviour of Steel Structures in Seismic Area", Naples, 9-12 June, 2003.
C62 BURSI O. S., LUCCHESI D. e SALVATORE W., " Partial-strength Beam-to-column Joints for High Ductile Steel-concrete Composite Frames". Proc. of the Ninth International Conference on Civil and Structural Engineering Computing, Egmond aan Zee, The Netherlands, 2-4 September, 2003.
C63 BURSI, O., CARAMELLI S., SALVATORE, W. and ZANDONINI, R. "Soluzioni Progettuali Per Strutture Sismoresistenti Composte Acciaio-Calcestruzzo Ad Elevata Duttilità ", XIX Congresso C.T.A. Giornate Italiane della Costruzione in Acciaio, 28-30 Settembre, Genova, 2003.
C64 BURSI, O. S. , Caramelli S., Fabbrocino G., Pinto A., Salvatore W., Taucer F., Tremblay R., Zandonini R., "Pseudo-dynamic testing of a 3D full-scale high ductile steel-concrete composite MR frame structure at ELSA", 13th World Conference on Earthquake Engineering, Vancouver, B.C. Canada, August 1-6, 2004. Paper N. 507.
C65 Bairrao R., BURSI O. S., Carydis P., Magonette G., Mouzakis H., Tirelli D., Williams M., "Benchmark testing and performance comparison of shaking tables and reaction walls". 13th World Conference on Earthquake Engineering, Vancouver, B.C. Canada, August 1-6, 2004. Paper N. 441.
C66 Salvatore W., BURSI O. S., Molinari M., Nardini L., Zonta D., "Vibration -based identification and assessment of a 3D composite frame structure at different damage levels". 13th World Conference on Earthquake Engineering, Vancouver, B.C. Canada, August 1-6, 2004. Paper N. 2812.
C67 Salvatore W., Braconi A., BURSI O. S., Tremblay R., "Modelling of a partial-strenght beam-to-column joint for high ductile steel-concrete composite MR frames". 13th World Conference on Earthquake Engineering, Vancouver, B.C. Canada, August 1-6, 2004. Paper N. 2929.
C68 BURSI, O. S. , Zandonini R., Caramelli S., Salvatore W., Haller M., "Seismic behavior of a 3D full-scale steel-concrete composite MR frame structure", Composite Construction V, Kruger National Park, South Africa, July 18-23, 2004.

C69 Braconi, A., Salvatore W. and BURSI, O. S. , "Component-based models of dissipative partial-strength beam-to-column composite joints", Composite Construction V, Kruger National Park, South Africa, July 18-23, 2004.
C70 Cafarella F., Chellini G., Salvatore W.,BURSI, O. S. , "Identifying the joint mechanical parameters of a steel-concrete composite frame structure in undamaged and damaged states", 18th Australiasan Conf. on the Mechanics of Structures and Materials - ACMSM18 , Perth, Western Australia, December 1-3, 2004.
C71 Molinari M., BURSI, O. S. , "Damage Detection of a Steel-concrete Composite Frame Structure Under Severe Seismic Loading Via the Inverse Eigensensitivity Method", Eurodyn2005 Conference Paris, France, 04-07 September 2005.
C72 BURSI, O. S. , Colombo A., Lucchesi D., Salvatore W. "Improved design and modelling of ductile beam-to-column joints for composite moment resisting frame structures", EuroSteel 2005 4th European Conf. on Steel and Composite Structures/ Research - Eurocodes - Practice , Maastricht, the Netherlands, 08-10 June 2005.
C73 Ferrario F., BURSI, O. S. , Colombo A., "Analysis and design of RC beam-to-column joints with encased steel profiles subjected to seismic actions", EuroSteel 2005 4th European Conf. on Steel and Composite Structures/ Research - Eurocodes - Practice , Maastricht, the Netherlands, 08-10 June 2005.
C74 Zonta D., Pozzi M., Forti M., Bursi O. S., "Smart RC elements for long-life monitoring of civil infrastructures. 12th SPIE Annual International Symposium on Smart Structures and Materials", San Diego, March 6-10, 2005.
C75 Zonta D., Bursi O. S., Novati G., Zandonini R., "An experimental evaluation of the performance of a smart-beam system". First International Conference on Experimental Structural Engineering", "AESE05" , Nagoya (Japan), July 19-21, 2005.
C76 BURSI, O. S. , Tondini N., Vulcan L., Stoten D. P. "ANALYSIS OF A DISCRETE FIRST-ORDER MODEL REFERENCE ADAPTIVE CONTROLLER DISCRETIZED BY THE ZERO-ORDER-HOLD DISCRETE EQUIVALENT", Fourth World Conference on Structural Control and Monitoring (4WCSCM) , San Diego, California, U.S.A., 11-13 July 2006.
C77 Zonta D., Pozzi M., Bursi O. S., Colombo A., "Industrial Design of Instrumented PRC Elements for the Condition Monitoring of Civil Infrastructure". SPIE Smart Structures and Materials , San Diego, 26 Feb-2 Mar 2006.
C78 Gonzalez-buelga A, Neild S., Wagg D., Bursi O. S., "A COMPARISON OF RUNGE KUTTA AND ROSENBROCK METHODS FOR REAL TIME DYNAMIC SUBSTRUCTURING". ASME International Mechanical Engineering Congress and Exposition (in print), Chicago, Illinois, USA, November 5–10, 2006.
C79 Molina J., Blackeborough T., Bairrao R., Bursi O. S., Tirelli D., Magonette G., Mouzakis H., Williams M., "TESTING PERFORMANCE BENCHMARK FOR SHAKING TABLES AND REACTION WALLS WITHIN THE NEFOREEE PROJECT". First European Conference on Earthquake Engineering and Seismology (in print), Geneva, Switzerland, 3-8 September, 2006 .
C80 Savadkoohi A., Gu L., Bursi O. S., Zandonini R, "IDENTIFICATION AND BEHAVIOUR OF PARTIAL STRENGTH JOINTS OF STEEL-CONCRETE MOMENT RESISTING STRUCTURES DESIGNED FOR SEVERE EARTHQUAKE LOADS AND POST-EARTHQUAKE FIRE". A Forecast of The Future for Steel and Composite Steel Concrete Structures. Professor Jean-Marie Aribert Retirement Symposium. , Rennes, France, 3-5 July, 2006 .
C81 BURSI, O. S. , Molinari M., Savadkoohi A., Zonta D., "MODAL UPDATING FOR THE IDENTIFICATION OF A STEEL-CONCRETE COMPOSITE MOMENT RESISTING STRUCTURE WITH PARTIAL-STRENGTH JOINTS". Sperimentazione su Materiali e Strutture. , Venice, Italy, 6-7 December, 2006 .
C82 Bonelli A., Bursi O. S., Ferrario F., Pucinotti R., Tondini N., Zandonini R., "On going activities of the RU 8 on the performance evaluation of steel-concrete composite joints and of steel connection details for fatigue performance of composite bridge decks". Materiali ed Approcci Innovativi per il Progetto in Zona Sismica e la Mitigazione della Vulnerabilità delle Strutture. , Salerno, Italy, 12-13 February 2007.
C83 Bonelli A., Bursi O. S., He L., Magonette G., Pegon P., "Characterization of a parallel interfield procedure for pseudo-dynamic testing with heterogeneous substructuring". COMPDYN 2007 Computational Methods in Structural Dynamics and Earthquake Engineering. , Crete, Greece, 13-16 June 2007.
C84 BURSI, O. S. , Vulcan L., Gonzalez-Buelga A., Neild S., Wagg D. J., "Application of partitioned L-stable integrators for real-time hardware-in-the-loop,". ECCOMAS Thematic Conference, Multibody Dynamics . , Milano, Italy, 25-28 June , 2007 .
C85 Erlicher S., Bursi O. S., Point N., "Thermodynamic analysis and applications of bouc-wen models endowed with strength and stiffness degradation". COMPDYN 2007 Computational Methods in Structural Dynamics and Earthquake Engineering. , Crete, Greece, 13-16 June 2007.
C86 BURSI, O. S. , GU, L., SAVADKOOHI, A., ZANDONINI, R. "Design and analysis of partial strength beam-to-column composite joints subjected to earthquake and post-earthquake fire", XII Conference in Seismic Engineering in Italy (ANIDIS 2007) , Pisa, Italy 10-14 June 2007.
C87 FERRARIO F., BURSI O. S., ZANDONINI R, PUCINOTTI R. "Steel-concrete composite full strength joints with concrete filled tubes. part I: seismic and fire design.". XXI C.T.A Conference. , Catania, Italy, 1-3 October 2007.
C88 FERRARIO F., BURSI O. S., ZANDONINI R, PUCINOTTI R. "Steel-concrete composite full strength joints with concrete filled tubes. part II: experimental and numerical results.". XXI C.T.A Conference. , Catania, Italy, 1-3 October 2007.
C89 BURSI, O. S. , VULCAN, L., BONELLI, A., PEGON, P., WAGG, D. J. "Development and applications of time-stepping methods for real-time and pseudo-dynamic testing with dynamic substructuring", 2nd International Conference on Advances in Experimental Structural Engineering, Shanghai , China 4-6 December, 2007.
C90 BURSI, O. S. ,Bonelli , A., Mammino , A., Pucinotti, R., Tondini,N. "External Post-Tensioning Retrofitting and Modelling of Steel-Concrete Box-Girder Bridges", 7th International Conference on Steel Bridges, Guimarães, Portugal, 4-6 June, 2008.
C91 Bonelli A.,Bonora E., BURSI O. S., Santini S., Vulcan L.,Zasso A. "Dynamic Analysis and Vibration Control of the Twin Deck Curved Suspension Foot/Cycle Bridge “Ponte Del Mare"". Footbridge 2008. , Porto, Portugal,2-4 July, 2008.
C92 Pucinotti R.,Ferrario F., BURSI O. S. "A Multi-Objective Advanced Design Methodology of Composite Beam-to-Column Joints Subjected to Seismic and Fire Loads". 2008 Seismic Engineering Conference. , Reggio Calabria, Italy,8-11 July, 2008.
C93 BURSI, O. S. , Ferrario , F., Pucinotti, R. "Analysis of Steel-Concrete Composite Beam-to-Column Joints: Welded Solutions", Composite Construction in Steel and Concrete VI, Devil's Thumb Ranch, Colorado , USA, 20-24 July, 2008.
C94 BURSI, O. S. , Ferrario , F., Pucinotti, R., Zandonini, R. "Analysis of Steel-Concrete Composite Beam-to-Column Joints: Bolted Solutions", Composite Construction in Steel and Concrete VI, Devil's Thumb Ranch, Colorado , USA, 20-24 July, 2008.
C95 BURSI, O. S. , Ferrario , F., Pucinotti, R., "Steel-concrete composite full strength joints with concrete filled tubes: design and test results", The 12th International Symposium on Tubular Structures, Shanghai, China, 8-10, October , 2008
C96 BURSI, O. S. , Cajot L., Ferrario F., Gracia J., Plumier A., Pucinotti R., Salvatore W., "Seismic performance of welded steel-concrete composite beam-to-column joints with concrete filled tubes", The 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.
C97 Alderighi E., BURSI, O. S. , Franssen J., Lennon T., Mallardo R., Pucinotti R., "Fire performance of undamaged and pre-damaged welded steel-concrete composite beam-to-column joints with concrete filled tubes", The 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.
C98 BURSI, O. S. , He L., Vulcan L., Pegon P., Wagg D., "Novel time integrators applied to non-linear real time and pseudo-dynamic tests", The 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.
C99 Lamarche C., Leclerc M., Tremblay R., Leger P., Bouaanani N., Koboevic S., BURSI, O. S. , "Comparison between real time nonlinear seismic hybrid and shake table testing techniques", The 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.
C100 BURSI, O. S. , He L., Jia C., Pegon P., "Coupled integration of dynamic systems based on L-stable linear implicit methods", Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering III, Ischia, Italy, June 8-10, 2009.
C101 BURSI, O. S. , Ceravolo R., Demarie G.V., Erlicher S., Molinari M., Zanotti Fragonara L., "Identification of the damage evolution in a benchmark steel-concrete composite structure during pseudo-dynamic testing", COMPDYN 2009 - ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece, June 22-24, 2009.
C102 Tondini N., BURSI, O. S. , Stojadinovic B., "Performance-based analysis of concrete and steel-concrete composite box-girder bridges", COMPDYN 2009 - ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece, June 22-24, 2009.
C103 BURSI, O. S. , Ceravolo R., Molina F.J., Molinari M., "Role and application of testing and computational techniques in seismic engineering", ACES Workshop - Advances in Performance-Based Earthquake Engineering, Corfu, Greece, July 4-7, 2009.
C104 BURSI, O. S. , Jia C., Wang Z., "Monolithic and partitioned L-stable Rosenbrock methods for dynamic substructure tests", International Conference on Advanced in Experimental Structural Engineering , San Francisco, USA, October 15-16, 2009.
C105 Bonelli A, BURSI, O. S. , Ceravolo R., Santini S., Tondini N., Zasso A., "Dynamic Identification and Structural Health Monitoring of a Twin Deck Curved Cable-Stayed Footbridge: The “Ponte Del Mare” of Pescara in Italy", The Fifth European Workshop on Structural Health Monitoring , Sorrento, Naples, Italy, 29 June - 02 July, 2010.
C106 Zanon G., Kumar A., BURSI, O. S. , Ferrario F., "High strength tubular columns and connections under earthquake, fire loading and fatigue ", The Second International Conference on Super-High Strength Steels , Peschiera del Garda, Verona, Italy, 17-20 October, 2010.

C107 BURSI, O. S., Ceravolo R., Demarie G., Erlicher S., Molinari M., Fragonara L. Z., "Non-linear Identification of a Benchmark Steel-Concrete Structure Subjected to Pseudo-Dynamic Tests", 14 European Conference On Earthquake Engineering , Ohrid, Republic of Macedonia, August 30- September 03, 2010. Abstract book ISBN 978-608-65185-0-9. Conference CD proceedings ISBN 978-608-65185-1-6.

C108 Wang Z., BURSI, O. S. and Wu B., "Equivalent force control method with acceleration correction for real-time substructure testing of a split-mass system", The 11th International Symposium on Structural Engineering , Guangzhou, China, Dec. 18-20, 2010.

C109 BURSI, O. S., Jia C. and Wang Z., "Partitioned time integration methods for hardware in the loop based on linearly implicit L-stable Rosenbrock methods", IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2011 , Kos Island, Greece, June 20-22, 2011.

C110a BURSI, O. S., Wang Z., Jia C. and Abbiati G., "Novel partitioned time integration methods for real time heterogeneous testing", IV International Conference on Advanced in Experimental Structural Engineering , Ispra, Italy, June 29-30, 2011.

C110b BURSI, O. S., Pucinotti R., Zandonini R. and Zanon G., "Seismic behaviour of beam-to-column joints with high strength steel tubular columns", IV International Conference on Advanced in Experimental Structural Engineering , Ispra, Italy, June 29-30, 2011.

C111 Ceravolo R, Zanotti Fragonara L., Erlicher S. BURSI, O. S. "Parametric identification of damaged dynamic systems with hysteresis and slip", IX International Conference on Damage Assessment of Structures , Oxford, UK, July 11-13, 2011.

C112 Loupos K., Kanellos G., BURSI, O. S., Frondistou S., Meissner J., Bairaktaris D., Griffoni B., Orfanoudakis A., "Application of Fibre-Optic technologies for Real-time Structural Monitoring - The MONICO EC Project", IX International Conference on Damage Assessment of Structures , Oxford, UK, July 11-13, 2011.

C113 Leclerc M., Molinari M., Bouaanani N., Tremblay R., Leger P., BURSI, O. S., "Effective strategies for real time hybrid simulation of near seismic collapse response of moment resisting frames", 2011 American Control Conference , San Francisco, USA, June 29-July 01, 2011.

C114 Paolacci F., Reza S., BURSI, O. S. , "Seismic analysis and component design of refinery piping systems", COMPDYN 2011 - III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May 26-28, 2011.

C115 BURSI, O. S., Bonelli A., Ceravolo R., Tondini N., Ussia A., "Dynamic and Aeroelastic Behavior of a Twin Deck Curved Cable-Stayed Footbridge Equipped with Passive Devices", Proceedings of the Engineering Mechanics Institute 2011 Conference EMI 2011, Boston, USA, June 2-4, 2011, 366-379.

C116 BURSI, O. S., Pucinotti R., Tondini N., Zanon G., "Seismic behaviour of high strength steel column joints", Proceedings of the 6th European Conference on Steel and Composite Structures, EUROSTEEL 2011, Budapest, Hungary, August 31- September 2, 2011, 573-578.

C117 Tondini N.,BURSI, O. S. , Bonelli A., Francescotti S., "Dynamic and Aeroelastic Behavior of a Twin Deck Curved Cable-Stayed Footbridge Equipped with Passive Devices", Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011, Leuven, Belgium, July 4-6, 2011, 1829-1835.

C118 Ussia A.,BURSI, O. S. , Bonelli A., "Optimal Semi Active MR Control Strategies of a Footbridge Endowed with TMDs", SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control, EACS 2012, Genoa, Italy, June 18-20, 2012, Paper No. #40.

C119 Abbiati G.,BURSI, O. S. , Xu G., Wu. B., "Novel Partitioned Time Integration Schemes for DAE Systems based on Generalized-alpha methods.", SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control, EACS 2012, Genoa, Italy, June 18-20, 2012, Paper No. #112.

C120 Abbiati G.,BURSI, O. S. , Molinari M., Xu. G., "Use of Partitioned Time Integration Schemes for Parallel Simulations of Hybrid Systems.", SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control, EACS 2012, Genoa, Italy, June 18-20, 2012, Paper No. #123.

C121 Wu B., Wang Z., BURSI, O. S. , "Nearly-perfect Compensation for Time Delay in Real-time Hybrid Simulation", SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control, EACS 2012, Genoa, Italy, June 18-20, 2012, Paper No. #245.

C122 Wu B., Wang Z., BURSI, O. S., "Nearly-perfect Compensation for Time Delay in Real-time Hybrid Simulation", Proceedings of the 15th World Conference in Earthquake Engineering, 15WCEE, Lisbon, Portugal, September 24-28, 2012, Paper No. #507.

C123 BURSI, O. S., Abbiati G., Wu B., Xu G., "Partitioned time integration methods for hybrid simulators", Proceedings of the 15th World Conference in Earthquake Engineering, 15WCEE, Lisbon, Portugal, September 24-28, 2012, Paper No. #3178.

C124 BURSI, O. S., Reza Md.S., Kumar A., Paolacci. F., "Seismic Performance of Bolted Flange Joints in Piping Systems for Oil and Gas Industries", Proceedings of the 15th World Conference in Earthquake Engineering, 15WCEE, Lisbon, Portugal, September 24-28, 2012, Paper No. #3513.

C125 BURSI, O. S., "Model-based controller for semi-active control - Active control for smart structures", First International Summer School on SMART STRUCTURES, Ed. D. Zonta, M. Gei and O.S. Bursi, Trento, Italy, September 3-7, 2012, ISBN 978-88-8443-425-8.

C126 Ussia, A., Bonelli, A., BURSI, O. S., " Modeling and Optimal Semi Active Control Strategies for adaptive MR-TMD", Proc. Structures Congress 2013 ASCE, http://dx.doi.org/10.1061/9780784412848, Ed. Leshko, B.J. and McHugh, J., Pittsburgh, May 3-7, 2013, PA.

C127 Abbiati, G., BURSI, O.S., Reza, M.S., “Monolithic time-integration algorithms for Hamiltonian systems suitable for real-time hybrid simulations”, SERIES Concluding Workshop - Joint with US-NEES, Earthquake Engineering Research Infrastructures, JRC-Ispra, May 28-30, 2013.

C128 Reza, M.S., Abbiati, G., Bonelli, A., BURSI, O.S., “Hybrid simulations of a piping system based on model reduction techniques”, SERIES Concluding Workshop - Joint with US-NEES, Earthquake Engineering Research Infrastructures, JRC-Ispra, May 28-30, 2013.

C129 Hasan, M.R., Farazi, F., BURSI, O.S., Reza, M.S., “A faceted lightweight ontology for earthquake engineering research projects and experiments”, SERIES Concluding Workshop - Joint with US-NEES, Earthquake Engineering Research Infrastructures, JRC-Ispra, May 28-30, 2013.

C130 Paolacci, F., Di Sarno, L., Pegon, P., Molina, J., Poljansek, M., BURSI, O.S., Abbiati, G. Ceravolo, R. Erdik, M., Derisi, R., Mohamad, A., “Assessment of the seismic behaviour of a retrofitted old R.C. highway bridge through PsD testing”, SERIES Concluding Workshop - Joint with US-NEES, Earthquake Engineering Research Infrastructures, JRC-Ispra, May 28-30, 2013.

C131 BURSI, O. S., Ussia, A., Kumar, A.," Structural health monitoring of a complex cable-stayed footbridge and reliability assessment ", Proc. ICOSSAR 2013, The 11th International Conference on Structural Safety & Reliability, New York, USA, June 16-20, 2013.

C132 Paolacci, F., Reza, M.S., BURSI, O.S., Gresnigt, N., Kumar, A., “Main Issues on the Seismic Design of Industrial Piping Systems and Components”, Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference, PVP 2013, July 14-18, 2013, Paris, France.

C133 Reza, M.S., BURSI, O.S., Abbiati, G., Bonelli, A., “Pseudo-Dynamic Heterogeneous Testing with Dynamic Substructuring of a Piping System under Earthquake Loading.”, Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference, PVP 2013, July 14-18, 2013, Paris, France.

C134 Hasan, M.R., Farazi, F., BURSI, O.S., Reza, M.S., “A Semantic Technology‐Based Information Management System for Earthquake Engineering Projects and Experiments”, 5th International Conference on Advances in Experimental Structural Engineering November 8-9, 2013, Taipei, Taiwan.

C135 Abbiati, G., BURSI, O.S., Cazzador, E. Ceravolo, R. and Mei, Z., “Hybrid simulation of an old reinforced concrete viaduct based on nonlinear substructuring techniques”, Proc. of the 2nd Conference on Smart Monitoring Assessment and Rehabilitation of Civil Structures 9-11, September, Istanbul, 2013, Turkey.

C136 Abbiati, G., BURSI, O.S., Reza, M.S., “Advances in Pseudo-Dynamic Testing of Complex Structures Based on Model Reduction Techniques”, 5th International Conference on Advances in Experimental Structural Engineering November 8-9, 2013, Taipei, Taiwan.

C137 Wang, Z., Wu, B., Bursi, O.S., Xu, G. and Ding, Y., “Model-based Delay Estimation Technique for Real-Time Hybrid Testing”, 5th International Conference on Advances in Experimental Structural Engineering November 8-9, 2013, Taipei, Taiwan.

C138 Bursi, O.S. Abbiati G., "The L-Stable Real-Time (LSRT) compatible time integration algorithm", 2013 https://nees.org/resources/simlsrt2.

C139 Abbiati G., Bursi, O.S., "The Modified Generalized-α (MG-α) time integration algorithm", 2013, https://nees.org/resources/simmgalpha.

C140 Bursi, O.S., Abbiati, G., Cazzador, E., Pegon, P., “An Improved Parallel Partitioned Time Integration Scheme based on the Generalized-a method for Hybrid Simulation”, Sixth World Conference on Structural Control and Monitoring, July, 15-17, 2014, Barcelona, Spain.

C141 Abbiati, G., Bursi, O.S., Cazzador, E., Molina, J., La Salandra, V. “A Model Updating Strategy for Hybrid Simulation of a Complex Bridge”, Sixth World Conference on Structural Control and Monitoring, July, 15-17, 2014, Barcelona, Spain.

C142 BURSI, O.S., Abbiati, G., Caracoglia, L., Reza, M.S., “Effects of Uncertainties in Boundary Conditions on Dynamic Characteristics of Industrial Plant Components”, Proceedings of the ASME 2014 Pressure Vessels & Piping Division Conference, PVP 2014, July 20-24, 2014, Anaheim, California.

C143 BURSI, O. S., Paolacci, F., Reza M. S., "Performance-based analysis of petrochemical piping systems located in earthquake-prone zones", Second European Conference On Earthquake Engineering and Seismology, Istanbul, Turkey, August 25-29, 2014.

C144 Sozonov, P., Pucinotti R., Tondini N., BURSI, O. S., Zanon G., " Probabilistic  Seismic Analysis of a Three-Dimensional Steel-Concrete Composite Structure", Proceedings of the 12th Twelfth International Conference on Computational Structures Technology, CST2014, Naples, Italy, 2-5 September, 2014.

C145 Zanon, G., Raso S., BURSI, O. S., D’Incau, M., Tondini N., " Laser cutting performance for structural steel – Effects on the mechanical properties", Proceedings of the 7th European Conference on on Steel and Composite Structures, EUROSTEEL 2014, Naples, Italy, 10-12 September, 2014.

C146 Abbiati G., Cazzador E., BURSI O.S., Pegon P., Molina F. J., Paolacci, F. “Hybrid Simulation Of Complex Structural Systems Based On Partitioned Time Integration Schemes.”, VI International Conference on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2015, May 2015, Venice, Italy.

C147 BURSI O.S. , Paolacci F., Reza M. S., “Seismic Performance Assessment Of Oil & Gas Piping Systems Through Nonlinear Analysis”, COMPDYN 2015 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, V. Papadopoulos, V. Plevris (eds.) Crete Island, Greece, 25–27 May 2015

C148 BURSI, O.S., Zonta, D., FASSIN, M. “Towards Intelligent Civil Infrastructure”, in 17th International Conference on Transparent Optical Networks (ICTON), pp. 1-4, Budapest, Hungary, July 5-9, 2015, DOI:10.1109/ICTON.2015.7193408

C149 Beltempo, A., Cappello, C., Zonta, D., Bonelli, A., BURSI, O.S., Costa, C., Pardatscher, W. “Structural Health Monitoring of the Colle Isarco Viaduct”, IEEE Workshop on Environmental, Energy and Structural Monitoring Systems, Trento, EESMS, 9-10July 2015.

C150 Costa, C., Pardatscher, W., Bonelli, A., Cappello, C., BURSI O.S., Zonta, D. “Monitoring based assessment of Colle Isarco Viaduct.” 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-7 2015) in Torino – Turin – Italy, on July 1-3, 2015.

C151 BURSI, O.S., Abbiati, G., Caracoglia, L., La Salandra, V., Di Filippo, R., Reza, M.S. “Dynamic Response of Coupled Tanks and Piping Systems under Seismic Loading”, Proceedings of the ASME 2015 Pressure Vessels & Piping Conference PVP 2015 July 19-23, 2015, Boston, Massachusetts, USA

C152 Abbiati, G., Cazzador, E., Lanese, I., Azam, S.E., BURSI, O.S., Pavese, A. “Recent advances on the hybrid simulation of bridges base on partitioned time integration, dynamic identification and model updating.” 6^th International Conference on Advances in Experimental Structural Engineering 11th International Workshop on Advanced Smart Materials and Smart Structures Technology August 1-2, 2015, University of Illinois, Urbana Champaign, United States

C153 Abbiati, G., BURSI, O.S., Lasalandra, V., Marelli, S., Stojadinovic, B. “Global Sensitivity Analysis of Hybrid Systems Based on Generalized Polynomial Chaos Expansion”, CIVIL-SOFT-COMP 2015 The Fourth International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering Prague, Czech Republic 1-4 September 2015

C154 Cazzador, E., Fassin, M., BURSI, O.S., Paolacci, F., Hechler, O. “Performance Based Earthquake Engineering applied to composite bridges with short and medium spans and concrete cross beams.” Proceedings of the International Symposium on Steel Bridges, Istanbul 14-16 September 2015.

C155 Fassin, M., Cazzador, E., BURSI, O.S., Paolacci, F. “An Innovative Mechanical Model For Steel-Concrete Connections Of Bridges Subjected To Earthquake Loadings”, XXV GIORNATE ITALIANE DELLA COSTRUZIONE IN ACCIAIO, Salerno 1-3 October 2015

C156 Abbiati, G.; BURSI, O.S., Lanese I., Pavese, A. “Hybrid simulations of complex isolated bridges enhanced with parallel time integrators and model updating.” EU-US-Asia workshop on hybrid testing Joint Research Centre, Ispra, 5-6 October 2015.

C157 Abbiati, G.; BURSI, O.S., Cazzador, E., Ceravolo, R., Mei Z., Paolacci, F. and Pegon, P., Pseudo-Dynamic Testing Based on Non-linear Dynamic Substructuring of a Reinforced Concrete Bridge Experimental Research in Earthquake Engineering. Chapter 7, EU-SERIES Concluding Workshop, Book Series: Geotechnical, Geological and Earthquake Engineering, Vol. 35, Taucer, Fabio, Apostolska, Roberta (Eds.), Springer, 2015, ISBN 978-3-319-10136-1

C158 La Salandra, V., Di Filippo, R., BURSI, O.S., Paolacci, F., Alessandri, S. “Cyclic Response of Enhanced Bolted Flange Joints for Piping Systems”, Proceedings of the ASME 2016 Pressure Vessels & Piping Conference PVP 2016 July 17-21, 2016, Vancouver, British Columbia, CANADA.

C159 Abbiati, G., BURSI, O.S., Caracoglia, L., Di Filippo, R., La Salandra. “Probabilistic Seismic Response of Coupled Tank-Piping Systems”, Proceedings of the ASME 2016 Pressure Vessels & Piping Conference PVP 2016 July 17-21, 2016, Vancouver, British Columbia, CANADA.

C160 Zonta, D., Cappello, C., Beltempo, A., Bonelli, A., Bolognani, D., BURSI O.S., D. Costa, C., Pardatscher, W., “Structural Retrofit and Health Monitoring of Colle Isarco Viaduct”, Structural Faults + Repair-2016, Edinburgh: 17-19 May 2016.

C161 Abbiati, G., Turri, F., Ramiro-Manzano, F., Pavesi, L., BURSI, O.S., “A Scalable Reduced Order Modelling Approach for Whispering-Gallery Mode Resonators (ICTON), pp. 1-4, Trento, Italy, July 11-14, 2016.

C162 BURSI, O.S., La Salandra, V., Abbiati, G., Caracoglia, L., “A comparison of online and offline experimental substructuring methods for the simulation of complex linear dynamic systems.”, Proceedings of the 6^th European Conference on Structural Control, July 11-13, 2016, Sheffield, ENGLAND.

C163 Cappello, C., Beltempo, A., Bonelli, A., Bolognani, D., Costa, C., Bolognani, D.,BURSI O.S., Zonta, D., “Advanced monitoring system applied to Colle Isarco viaduct”, 8^th European Workshop on Structural Health Monitoring, Bilbao, July 5-8, 2016.

C164 Beltempo, A., Bonelli, A., Cappello, C., Bolognani, D., Bolognani, D., BURSI O.S., Zonta, D., Costa, C., Pardatscher, W., “Multi-sensor structural monitoring of Colle Isarco viaduct”, 8^th IABMAS2016, 8th International Conference on Bridge Maintenance, Safety and Management, June 26 - 30, 2016 | Foz do Iguaçu | Brazil.

C165 Caprinozzi, S., Ahmed, M.M., Paolacci, F., BURSI, O.S., La Salandra, V. “Univariate fragility models for seismic vulnerability assessment of refinery piping systems”, PVP2017-65138, Proceedings of the ASME 2017 Pressure Vessels & Piping Conference PVP 2017 July 16-20, 2017, Waikoloa, Hawaii, USA.

C166 Zanon, G., BURSI, O. S., Raso S., Scardi, P. D’Incau, M., Raso S., " Effects of laser cutting on the cut-edge properties of structural steel S355N subjected to high-cycle fatigue", Proceedings of the 8th European Conference on Steel and Composite Structures, EUROSTEEL 2017, Copenhagen, Denmark, 13-15 September, 2017.

C167 Cazzador, E., BURSI, O.S., Paolacci, F., Alessandri, S. “Mechanical models for steel-concrete composite connections in view of performance-based seismic analysis of short-medium span bridges”, XXVI GIORNATE ITALIANE DELLA COSTRUZIONE IN ACCIAIO, Venezia 28-30 September 2017

C168 Pedot, M., BURSI, O.S., Di Filippo, R., La Salandra, V., Reza, Md. S., “Performance of a full scale LNG plant in a seismic high-prone area”, XXVI GIORNATE ITALIANE DELLA COSTRUZIONE IN ACCIAIO, Venezia 28-30 September 2017

C169 Zanon, G., BURSI, O.S., Scardi, P., D’Incau, M., Raso, S., “Properties of S460N steel grade coupons and of bolted joints subjected to high-cycle fatigue processed with laser cutting”, XXVI GIORNATE ITALIANE DELLA COSTRUZIONE IN ACCIAIO, Venezia 28-30 September 2017

C170 Tonelli, D.,  Verzobio, A.,  Cappello, C.,  Bolognani, D.,  Zonta, D.,  BURSI, O.S.a,  Costa, C., "Expected utility theory for monitoring-based decision support system", Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017, Stanford; 12-14 September 2017.

C171 Moritz Wenzel, Francesco Basone, BURSI, O.S., "Novel Metamaterial-based Foundation Concept Applied to a Coupled Tank-pipeline Systems", Proceedings of the ASME 2018 Pressure Vessels & Piping Conference, PVP 2018, Prague, Czech Republic, July 15-20, 2018.

C172 Massimiliano Pedot, Rocco Di Filippo, BURSI, O.S., ”A Seismic Vulnerability Analysis of a Liquefied Natural Gas Subplant", Proceedings of the ASME 2018 Pressure Vessels & Piping Conference, PVP 2018, Prague, Czech Republic, July 15-20, 2018.

C173 Paolacci, F., Corritore D., Caputo, A.C. BURSI, O.S.,and Kalemi, B. A probabilistic approach for the assessment of LOC events in steel storage tanks under seismic loading, Proceedings of the ASME 2018 Pressure Vessels and Piping Conference, PVP2018, July 15-20, 2018, Prague, Czech Republic, PVP2018-84374

C174 BURSI, O.S., Zonta, D., Debiasi, E., Trapani, D.," Structural health monitoring for seismic protection of structure and infrastructure systems", Proceedings of the 16^th European Conf. on Earthquake Eng., Thessaloniki, Greece, June 18-21, 2018.

C175 Moritz Wenzel, BURSI, O.S., "Metamaterial-Based Foundation System for the Seismic Isolation of Fuel Storage Tanks", Proceedings of the 16^th European Conf. on Earthquake Eng., Thessaloniki, Greece, June 18-21, 2018.

C176 Crowley, H., BURSI, O.S., et al., " Towards a Uniform Earthquake Risk Model for Europe", Proceedings of the 16th European Conf. on Earthquake Eng., Thessaloniki, Greece, June 18-21, 2018.

C177 DI Filippo, R., Abbiati, G., Sayginer, O., BURSI, O.S. and Paolacci. F. Numerical Metamodeling of a Coupled Tank-Piping System for Seismic Fragility Analysis with Artificial Waveforms, Proceedings of the ASME 2019 Pressure Vessels and Piping Conference, PVP2019, July 14-19, 2019, San Antonio, Texas, PVP2019-93685

C178 Phan, H.N., Paolacci. F, Corritore, D., O., Tondini, N. and BURSI, O.S.,’ A Kriging-Based Surrogate Model for Seismic Fragility Analysis of Unanchored Storage Tanks, Proceedings of the ASME 2019 Pressure Vessels and Piping Conference, PVP2019, July 14-19, 2019, San Antonio, Texas, PVP2019-93259

C179 Ciucci, M., Marino, A., Paolacci. F. and BURSI, O.S.,’Integrated Smart Seismic Risks Management, Proceedings of the ASME 2019 Pressure Vessels and Piping Conference, PVP2019, July 14-19, 2019, San Antonio, Texas, PVP2019-94027

C180 Zanon, G., BURSI, O.S., Scardi, P., Bison, P., Valli, A., “Effects of Laser Cutting on S235-S460 Structural Steels for High-Cycle Fatigue Applications”, XXVII GIORNATE ITALIANE DELLA COSTRUZIONE IN ACCIAIO, Bologna 3-5 October 2019

In summary: 189 papers published on conference proceedings, 180 of which on international conference proceedings and 39 on national conference proceedings; 1 poster; 2 software products.