Alessandro Pegoretti

1988    Graduated in Materials Engineering at the University of Trento with a dissertation entitled “Mechanical behaviour of sol-gel coated soda-lime glass”, tutor prof G.Carturan (summa cum laude).

ACADEMIC CARRIER

- Current position:        Full Professor

                                     Department of Industrial Engineering 

                                     University of Trento, Trento, Italy

- Professional experiences

2021 – present        Director of the Department of Industrial Engineering

                                     University of Trento, Trento, Italy

2012 – 2018               Coordinator of the Doctoral School

                                     in Materials, Mechatronics and Systems Engineering

                                     University of Trento, Trento, Italy

2015 – 2018               Special Visiting Researcher, CNPq position

                                     Department of Mechanical Engineering

                                     Federal University of Santa Catarina – UFSC, Florianópolis, SC, Brazil

2011 – 2015                   Graduate Faculty Associate

                                     Department of Mechanical & Materials Engineering

                                     University of Nebraska - Lincoln, USA

2006                           Visiting Professor

                                     Universidad Nacional del Sur, Dept. of Chemical Engineering

                                     PLAPIQUI (UNS-CONICET) Bahía Blanca, Argentina.

2002 – 2012              Associate Professor 

                                     Dept. of Materials Engineering and Industrial Technology

                                     University of Trento, Trento, Italy

1998 – 2001                   Adjunct Professor

                                     Dept. of Materials Engineering and Environment

                                     University of Modena and Reggio Emilia, Modena, Italy

1997                              Research scientist

                                     Institute of Materials Science, University of Connecticut, Storrs, USA

1995                              Postdoctoral Fellow

                                     Institute of Materials Science, University of Connecticut, Storrs, USA

1992 – 2001               Assistant Professor 

                                     Dept. of Materials Engineering and Industrial Technology, 

                                     University of Trento, Trento, Italy

TEACHING ACTIVITY

1997 – 2001         “Science and Technology of Composite Materials” (Master program, University of Modena and Reggio Emilia)

2001 – 2019          “Properties and Characterization of Materials” (Master program, University of Trento)

2005 – 2017          “Laboratory of Mechanics of Materials” (Master program, University of Trento)

2005 – 2011         “Wind Turbines Design” (Master program, University of Trento)

2004 – present      “Experimental Mechanics of Materials” (PhD School, University of Trento)

2017 – present      “Recycling and Sustainable Materials”

2020 – present      “Composite Materials Engineering”

The main aim of the research activity is to investigate the structure-properties relationships in polymer, polymer blends composite and nanocomposites, with particular attention to their mechanical behaviour.

Main fields of interests are:

- Deformation, yield and fracture mechanics of polymers and composites.

- Processing and characterization of multiphase polymeric materials (micro- and nanocomposites, blends).

- Stability of polymeric and composite materials under degradative conditions.

- Environmentally friendly polymers and composites (biodegradable, from renewable resources, recyclable).

- Multifunctional polymers and composites (electrically and thermally conductive, with shape memory features, with self-healing capabilities, for thermal energy storage applications).

PUBBLICATIONS

- Publications

Full list and bibliometric parameters at https://pegoretti.dii.unitn.it/  

- Main Research Grants

- 1999-2001 PRIN 9909198827_002 - Non linear dynamic mechanical behaviour of rubber compounds. Participant.

- 2000-2002 PRIN MM09012922_005 - Analysis of the thermomechanical behaviour of materials based on recycled PET for a usage in building constructions. Local coordinator.

- 2003-2005 PRIN 2003093440_002 – Physico-mechanical characterization of new functional hybrid materials based on carbon nanotubes and polymer matrix for photovoltaic devices. Local coordinator.

- 2006-2010 FP6 European Project Network of Excellence on Nanostructured and Functional Polymer-based Materials and Nanocomposites ( NANOFUN-POLY ) - Local coordinator.

- 2007-2009 PRIN 20075939JY_003 - Continuous fibre composites with a nanocomposite matrix: preparation, microstructure and thermo-mechanical properties (NanoCompStrut). Local coordinator.

- 2006-2008 Executive programme for scientific and technological co-operation between Italy and Argentina for the years 2006-2007 – Improvements of interfacial adhesion in multiphasic systems. Project coordinator.

- 2011-2013 Executive programme for scientific and technological co-operation between Italy and Hungary for the years 2011-2013 – On the toughness of thermoplastic nanocomposites as studied by the essential work of fracture (EWF) approach. Project coordinator.

- 2012-2014 Fondazione Cassa di Risparmio di Trento e Rovereto. Project "Preparation and characterization of wood-based degradable composite laminates". Project coordinator.

- Main Industrial Contracts

- 2005 (Eurostandard spa) – Development of electrical conductive polyethylenes.

- 2006 (Iveco spa) – Impact properties of PP based composites.

- 2007 (Tozzi Nord srl) – Wind blades: materials selection and design.

- 2008 (Elantas Camattini spa) – Fatigue behaviour of composite adhesive joints.

- 2009 (Luxottica spa) – Static and fatigue mechanical behaviour of titanium adhesive joints.

- 2010 (UFI Filters spa) - Development of new nanocomposite polymer nets for liquids filtration.

- 2011 (IHP Composite srl) - Novel composite-reinforced gas storage tanks.

- 2014 (UFI Filters spa) - Development of electrically conductive polymer fibers for multifunctional filters.

- 2017 (Iveco Spa) – Composites for protective barriers.

- 2018 (Novurania Spa) – Elastomeric composites for thermal energy storage and release.

- 2020 (CMS Spa) – 3D printing with engineering plastics and composites.

- 2021 (Aquafil Spa) – Polyamide-based fully recyclable composites.

- Memberships of Editorial Boards of international scientific journals

as an editor:

2014 - 2021           Specialty Chief Editor "Frontiers in Materials: Polymeric and Composite Materials"

2014 - present       Associate Editor of the "Journal or Reinforced Plastics and Composites"

2020 - present       Editor-in-Chief of the “Advanced Composites” section of "Materials”.

2021 – 2022          Editor, “Polymer Composites”

2021 – present      Editor-in-Chief, “Polymer Composites”

as a member:

2006 - present       Member of the Editorial Board of “eXPRESS Polymer Letters”

2008 - present       Member of the Editorial Board of “Composite Interfaces”

2010 - 2014           Member of the Editorial Board of “The Open Textile Journal”

2010 - present       Member of the Editorial Board of “Materials Sciences and Applications”

2011 - present       Member of the Editorial Board of "Soft Nanoscience Letters”

2012 - 2017           Member of the Editorial Board of "Dataset Papers in Materials Science"

2014 - present       Member of the Editorial Board of "International Journal of Polymer Science"

2015 - present       Member of the Editorial Board of "Journal of Advanced Material Sciences"

2015 - present       Member of the Editorial Board of "Journal of Nanomaterials"

2016 - present       Member of the Editorial Board of "Polymer Materials Science & Engineering"

2016 - present       Member of the Editorial Board of "Journal of Composites Science”

2018 - present       Member of the Editorial Board of "Journal of Applied Biomaterials and Functional Materials”

2018 - 2022           Member of the Editorial Board of "Advances in Materials Science and Engineering”

2018 - present       Member of the Editorial Board of "Applied Sciences”

2018 - present       Member of the Editorial Board of “Science and Engineering of Composite Materials”

- Associations

1993 – present             Italian Association of Materials Engineering (AIMAT)

1999 – present             Society for the Advancement of Material and Process Engineering (SAMPE)

1999 – present             Italian Interuniversitary Consortium of Materials Science and Technology (INSTM)

2010 – present             Member of the Council of the European Society for Composite Materials (ESCM)

2011 – present             Society of Plastic Engineers (SPE)

- 1996 Fulbright scholarship for a one year stage at the University of Connecticut (USA).

- 1998 Research prize by the Italian Association of Materials Engineering for the paper "Fiber/matrix adhesion in nylon-6/glass fiber composites" presented at the IV AIMAT Conference, Cagliari (Italy), 8-11 june 1998.

- 2010 Borealis Student Innovation Award - for an innovative research with a clear potential of practical applications (student M. D'Amato, tutor: A.Pegoretti) for the thesis « Polymeric Nanocomposite Fibres».

Proceedings of international conferences:

C84     Cestari F, Medeiros Araujo T, Pegoretti A, Fambri L. Study of fibers production from melt spinning of Gaialene resins. 3rd Congress on Biodegradable Polymer Packaging - BioPolPack, Parma, Italy, May 29-30, 2014.

C83     Pedrazzoli D, Pegoretti A, Kalaitzidou K. Multi-scale hybrid micro- nanocomposites based on graphite nanoplatelets and glass fibers. Research Workshop of the Israel Science Foundation COMPO2014 Nanocomposites and Biocomposites, Weizmann Institute of Science, Rehovot, Israel April 28 – May 1, 2014. - invited lecture.

C82     Pedrazzoli D, Kalaitzidou K, Pegoretti A. Light weight multifunctional composites with enhanced mechanical properties. ANTEC 2014, Las Vegas, Nevada, USA, April 28–30, 2014.

C83     Pedrazzoli D, Kalaitzidou K, Pegoretti A. Effect of the manufacturing process on the interphase properties of nanomodified polypropylene/E-glass composites. ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego (CA), November 15-2, 2013.

C82     Pedrazzoli D, Pegoretti A. Expanded graphite nanoplatelets as coupling agents in glass fiber reinforced polypropylene composites. Composite Week @ Leuven. Leuven, Belgium, September 16-20, 2013.

C81     Pegoretti A. Effects of NP dispersion, self assembly, etc. on various physico-chemical properties. The 3^rd Workshop on Non-linear deformation behavior of Polymer Nanocomposites. Brno, Czech Republic, September 9-11, 2013 - invited lecture

C80     Pegoretti A, Traina M. Graphene based poly(vinyl alcohol) nanocomposites: effect of humidity content. The 19^th International Conference on Composite Materials. Montreal, Canada July 28 –August 2, 2013.

C79     Cataldi A, Dorigato A, Deflorian F, Pegoretti A. Polymer composites for artworks protection and restoration. European Polymer Federation Conference 2013 (EPF2013) Pisa, Italy, June 16-21, 2013.

C78     Dabrowska I, Fambri L, Pegoretti A, Ferrara G. Compounding and spinning of polypropylene nanocomposites with fumed nanosilica. European Polymer Federation Conference 2013 (EPF2013) Pisa, Italy, June 16-21, 2013.

C77     Dorigato A, Brazzo S, Pegoretti A. Shape memory behaviour of poly(cyclooctene) based nanocomposites. European Polymer Federation Conference 2013 (EPF2013) Pisa, Italy, June 16-21, 2013.

C76     Fambri L, Pegoretti A, Lorenzi D, Dorigato D, Giacomelli G, Brugnara M. Effect of different nanofillers on polyamide 6. Third International Conference on Multifunctional,  Hybrid and Nanomaterials, Sorrento, Italy, March 3-7, 2013.

C75     Brugnara M, Dorigato A, Fambri L, Giacomelli G, Pegoretti A. Improving non-woven polyamide networks through nanoparticles. Third International Conference on Multifunctional,  Hybrid and Nanomaterials, Sorrento, Italy, March 3-7, 2013.

C74     Pedrazzoli D, Pegoretti A. Interfacial stress transfer in nanomodified PP/E-glass composites. Interface 21, Kyoto, Japan, August 6-8, 2012.

C73     Karger-Kocsis J, Barany T, Meszaros L, Khumalo V M, Pegoretti A. On the toughness of polymer nanocomposites assessed by the essential work of fracture (EWF) approach. ECCM15- 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012 (ISBN: 978-88-88785-33-2).

C72     Coletti M, Frache A, Carosio F, Pegoretti A. Evaluation of the barrier effect to humidity of surface treatments on composites. ECCM15- 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012 (ISBN: 978-88-88785-33-2).

C71     Pegoretti A, Dorigato A. Epoxy nanocomposite adhesives. ECCM15- 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012 (ISBN: 978-88-88785-33-2).

C70     Medeiros Araujo T, Pegoretti A. Liquid crystalline single-polymer short-fibres composites. ECCM15- 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012 (ISBN: 978-88-88785-33-2).

C69     Dorigato A, Pegoretti A. Biodegradable polyvinylalcohol based single polymer composites. ECCM15- 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012 (ISBN: 978-88-88785-33-2).

C68     Soave N, Dorigato A, Pegoretti A, Fambri L. Plasticization of PLA by using soybean oil and grape seed oil. 2nd Congress on Biodegradable Polymer Packaging - BioPolPack, Milano, Italy, May 10-11, 2012.

C67     Kaci M, Hamma A, Pegoretti A. Morphology, Thermal and Mechanical properties of Polypropylene/Date Stone Flour Composites. International Conference on Bio-based Materials and Composites (ICBMC'12), Marrakech, Morocco, February 22-24, 2012.

C66     Dabrowska I, Fambri L, Pegoretti A, Ferrara G. Perkalite organoclay for the production of nanocomposite polyethylene fibers. EUROFILLERS 2011, Dresden, Germany, August 21-25, 2011, p. 77.

C65     Pegoretti A, D’Amato A, Dorigato A, Fambri L, Zhang Z. High performance nanocomposite fibres. ECCM14- 14th European Conference on Composite Materials, Budapest, Hungary, June 7-10 2010 (ISBN: 978-963-313-008-7).

C64     Dorigato A, Morandi S, Pegoretti A. Morphological and thermo-mechanical characterization of epoxy-clay nanocomposites ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials, Vicenza, Italy, September30 - October 2, 2009.

C63     Kalfon Cohen E, Pegoretti A, Marom G. Composite systems from thermotropic liquid crystalline fibers. International Conference on Structural Analysis of Advanced Materials (ICSAAM 2009), Tarbes, France, September 7-10, 2009.

C62     Dorigato A, Lonardi C, Fambri L, Pegoretti A, Kolarik J, Penati A. Linear low density (LLDPE)-cycloolefin copolymer blends. POLYMERFEST, Palermo, Italy, August 30 - September 2, 2009.

C61     Lonardi C, Dorigato A, Pegoretti A, Fambri L. Nanocomposites of fumed silica and cyclo olefin copolymer. EUROFILLERS 2009, Alessandria, Italy, June 21-25, 2009.

C60     Pegoretti A. Development of liquid crystalline single-polymer composites. 2009 International Symposium on Processing and Properties of Reinforced Polymer Composites, Taichung, Taiwan June 15-16, 2009, p. 21 – invited lecture.

C59     Pegoretti A, Dorigato A, Penati A. On the mechanical behaviour of polyethylene based micro- and nanocomposites at low and large strain levels. 4th China-Europe Symposium on Processing and Properties of Reinforced Polymers, Guilin, China June 8-12, 2009, p. 36. – invited lecture.

C58     Pegoretti A, Dorigato A. Poly(methylpentene)-silica nanocomposites. 5th International Conference NANOFUNPOLY, Paris, France , April 15 - 17, 2009.

C57   Castellani L, Franchini L, Mariani P, Pegoretti A, Penati A, Vezzari M. On the essential work of fracture of LLDPE films. 5th ESIS TC4 Conference on Polymers and Composites, Les Diablerets, Switzerland, September 7-11, 2008.

C56   Pegoretti A. Mechanics of polymer nanocomposites. International Workshop on Physics and Mechanics of Polymer Nanocomposites: Bridging the gap between discrete matter and continuum. Brno, Czech Republic, September 4-5, 2008– invited lecture.

C55   Etcheverry M, Ferreyra M L, Pegoretti A, Barbosa S E, Capiati N J, Grafting of PP onto glass fibers: a method for enhancing the interfacial adhesion. XI Simposio Latinoamericano y IX Congreso Iberoamericano de Polimeros – SLAP 2008 Lima Perù, July 15 – 18, 2008.

C54   Bondioli F, Dorigato A, Fabbri P, Ferrari AM, Messori M, Pegoretti A. High-density polyethylene reinforced with submicron titania particles. Nanotechnology 2008: Life Sciences, Medicine & Bio Materials - Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, Boston, USA, June 1 - 5, 2008 Volume 2, pp. 719-722.

C53   Traina M, Pegoretti A, Penati A. Creep behaviour of multiwalled carbon nanotubes – high density polyethylene nanocomposites. 4th International Conference NANOFUNPOLY, Rome, Italy, April 16 - 18, 2008.

C52   Pegoretti A. Vectran-based single polymer composites. SAMPE EUROPE 28th International Conference and Forum, Paris, France, March 31 - April 2, 2008, pp 421-426, CD-ROM - ISBN 978-3-9522677-7-6

C51   Traina M, Pegoretti A, Penati A. Creep resistance of polyethylene micro- and nanocomposites. Trento Innovation Conferences in Materials Engineering, 1^st Meeting: Advances in Polymers, Composites and Biomaterials, Trento, Italy, December 16 – 19, 2007 Delegate Manual p. 133 (ISBN 978-88-8443-209-4).

C50   Monelli B, Zeni D, Pegoretti A, Fontanari V. Parameters identification in finite element contact analysis of spherical indentation tests. Trento Innovation Conferences in Materials Engineering, 1^st Meeting: Advances in Polymers, Composites and Biomaterials, Trento, Italy, December 16 – 19, 2007 Delegate Manual p. 116 (ISBN 978-88-8443-209-4).

C49   Dorigato A, Pegoretti A, Penati A. Toughening effect of silica nanoparticles in linear low density polyethylene (LLDPE) – silica nanocomposites. Trento Innovation Conferences in Materials Engineering, 1^st Meeting: Advances in Polymers, Composites and Biomaterials, Italy, December 16 – 19, 2007 Delegate Manual pp. 96-97 (ISBN 978-88-8443-209-4).

C48   Kolarik J, Pegoretti A, Fambri L, Penati A. Predictive format for mechanical properties and gas permeability of polymer blends. Trento Innovation Conferences in Materials Engineering, 1^st Meeting: Advances in Polymers, Composites and Biomaterials, Trento, Italy, December 16 – 19, 2007 Delegate Manual p. 58 (ISBN 978-88-8443-209-4).

C47   Bondioli F, Dorigato A, Fabbri P, Messori M, Pegoretti A, Pilati F. High-density polyethylene reinforced with titania nanoparticles. European Polymer Congress EPF 2007, Portoroz (SLO), July 2-6, 2007 Book of abstracts (ISBN 978-961-907317-9).

C46   Fambri L, Pasqualini E, Kolarik J, Pegoretti A, Penati A. Rheological study on polypropylene/cycloolefin copolymer blends. EPF EUPOC 2007 – European Conference, Gargnano (BS), Italy May 27 - June 1, 2007.

C45   Traina M, Pegoretti A, Penati A, Barbosa S E. Creep behaviour of high-density polyethylene – carbon black composites. 3^rd China-Europe Symposium on Processing and Properties of Reinforced Polymers Budapest, Hungary, June 11-15, 2007, p. 27.

C44   Kalfon E, Pegoretti A, Migliaresi C, Weinberg A, Marom G. Morphology of a Liquid Crystalline Single Polymer Composite Analyzed by Synchrotron Microbeam WAXD. 5^th Asian-Australasian Conference on Composite Materials (ACCM-5) Hong Kong, November 27-30, 2006.

C43   Mukhopadhyay S, Ghongade V, Talwade R, Mawal V, Dhake J D, Pegoretti A, Gavazza C. Some studies on banana fibers. Advances in Fibrous Materials, Nonwoven, and Technical Textiles (AFINT 2006) Coimbatore, India, August 7-9, 2006.

C42   Tagliazucca V, Callone E, Dorigato A, Pegoretti A, Dire S. Synthesis of organic/inorganic hybrid nanoparticles by sol-gel chemistry. Syntheses and Methodologies in Inorganic Chemistry from Molecules to Nanosystems (SAMIC 2006) Bressanone (BZ), Italy, December, 3-7 2006.

C41   Pandini S, Pegoretti A, Ricco T. Deformation temperature and strain rate effects on non elastic strain recovery of semicrystalline poly butylene terephthalate. 3^rd International Conference on Times of Polymers (TOP) & Composites, Ischia (NA), Italy, June 18-22, 2006, pp. 20-21.

C40   Pandini S, Marini M, Migliaresi C, Pegoretti A. Time, temperature and strain effects on viscoelastic Poisson’s ratio of different polymeric materials. 3^rd International Conference on Times of Polymers (TOP) & Composites, Ischia (NA), Italy, June 18-22, 2006, pp. 163-164.

C39   Pegoretti A, Dorigato A, Penati A. Production and characteization of polyurethane-clay nanocomposites. 2nd International Symposium on “Nanostructured and Functional Polymer-based Materials and Nanocomposites” (NANOFUN-POLY), Lyon, France, May 29-31, 2006, on CD ROM.

C38   Pandini S, Pegoretti A, Ricco T. Energy storage and recovery behaviour of post-yield deformed semicrystalline poly(butylene terephthalate): deformation temperature and rate effects. 13^th International Conference on Deformation, Yield and Fracture of Polymers DYFP2006, April 10-13, 2006, Kerkrade, the Netherlands, pp. 393-396.

C37   Pegoretti A, Zanolli A, Migliaresi C. New liquid crystalline single-polymer composites. 3rd International Conference on Science and Technology of Composite Materials COMAT 2005, December 11-14, 2005, Buenos Aires, Argentina, ISBN 987-544-162-7, pp. 28-29.

C36   Pegoretti A, Pizzimenti C, Ricco T. On the essential work of fracture of neat and rubber toughened polyamide-66. 4^th ESIS TC4 Conference on Polymers and Composites, September 15-18, 2005, Les Diablerets, Switzerland.

C35   Traina M, Pegoretti A, Penati A. Processing and electrical conductivity of high density polyethylene – carbon black composites. 1^st International Symposium on “Nanostructured and Functional Polymer-Based Materials and Composites” NANOFUN-POLY, April 24-27, 2005, Dresden, Germany, on CD ROM.

C34   Pegoretti A, Bertoldi E, Ricco T. Plane stress fracture toughness of ductile polymeric films: effect of strain rate on the essential work of fracture parameters. 11^th International Conference on Fracture, March 20-25, 2005 Turin, Italy, on CD ROM.

C33   Pandini S, Pegoretti A. Strain rate dependence of the anisotropic fracture toughness of rubber modified polypropylene films. 11^th International Conference on Fracture, March 20-25, 2005 Turin, Italy, on CD ROM.

C32   Marom G, Ratner S, Pegoretti A, Migliaresi C. Fatigue behavior and dynamic mechanical properties of filament wound PE/PE composites and compacts. 3^rd International Conference on Fatigue of Composites, September 13-15, 2004, Kyoto, Japan.

C31   Pegoretti A, Ricco T. Rate and temperature effects on the plane stress essential work of fracture in semicrystalline poly(ethylene-terephthalate). 3^rd ESIS Conference on Polymers and Composites, September 15-18, 2002, Les Diablerets, Switzerland.

C30   Dirè S, Sglavo V M, Pegoretti A, and Sorarù G D. Structure-properties behavior during aging of hybrid polymethylsiloxane-oxide materials prepared by the sol-gel process. 9^th Meeting on Synteses and Methodologies in Inorganic Chemistry (SAMIC): New Compounds and Materials 4-7 December 2000 Bressanone  (BZ), Italy.

C29   Giannotta G, Po’ R, Fiocca L, Cardi N, Lucchelli E, Braglia R, Fambri L, Pegoretti A, Gleria M. Hexakis(4-oxazolinophenoxy) cyclophosphazene as a novel compatibilizer for polycarbonates and polyamides. 9^th International Conference on Inorganic Ring Systems, Saarbrücken, Germany, July 23-28, 2000, P107.

C28   Ricco T, Pegoretti A, Guardini A. The nature of deformation in semicrystalline polybutyleneterphthalate at high strain levels. 11^th International Conference on Deformation, Yield and Fracture of Polymers, Cambridge, UK, April 10-13, 2000, ISBN 1-86125-120-3, pp. 313-316.

C27   Penati A, Pegoretti A, Gavazza C, Fambri L. Isothermal and dynamic methods for evaluation of the thermal stabilities of different polyurethanes. 4^th Mediterranean Conference on Calorimetry and Thermal Analysis, Patras, Greece, August 29–September 1 1999, pp. 66-72.

C26   Pegoretti A and Ricco T. Crack growth by fatigue and viscoelastic creep. 2^nd ESIS Conference on Polymers and Composites, Les Diablerets, Switzerland, September 13-15, 1999.

C25   Pegoretti A, Ricco T. Fatigue behaviour of fiber reinforced polypropylene. ECCM – 8 European Conference on Composite Materials, Naples, Italy, June 3-6, 1998, Woodhead Publshing Ltd., Cambridge, UK, 1998, Vol. 3, pp. 135-142.

C24   Pegoretti A, Fambri L. Temperature and strain rate effects on the interfacial shear stress transfer in nylon-6/glass fiber composites. Prague Meetings on Macromolecules, 18^th Discussion Conference “Mechanical Behaviour of Polymeric Materials”, Prague, Czech Republic, July 20-23, 1998, PC54.

C23   Pegoretti A, Ricco T, Tecchiolli A. Non-linear dynamic mechanical behaviour of filled elastomers. Prague Meetings on Macromolecules, 18^th Discussion Conference “Mechanical Behaviour of Polymeric Materials”, Prague, Czech Republic, July 20-23, 1998, PC53.

C22   Zappini G, Pegoretti A, Bianchetti M and Fambri L. New endodontic post in composite material. International Conference on Advances in Biomaterials and Tissue Engineering, Capri, Italy, June 14-19 1998,

C21   Pegoretti A, Fidanza M, Migliaresi C, DiBenedetto A T. Interface toughness in nylon-6/E-glass fibres composites. Interfacial Phenomena in Composite Materials IPCM ’97, Eger, Hungary, September 1-3 1997.

C20   Penati A, Kolarik J, Pegoretti A, Gavazza C, Fambri L. Hydrothermal degradation of different polyurethane ureas. J. MED. C.A.T. 97, Palma de Mallorca, Spain, June 24 - 28, 1997, (in Revista de Ciencia vol 20, 72, 1997).

C19   Fambri L, Gleria M, Minto F, Pegoretti A. Reaction kinetics and thermo-mechanical characterization of light-induced grafted poly(organophosphazenes). EPF96 - The Sixth European Polymer Federation Symposium, Crete, Greece October 7-11, 1996,.

C18   Pegoretti A, Fambri L, Migliaresi C. Effects of thermal treatments on the interfacial shear strength of nylon-6/glass and carbon fiber composites. 6^th International Conference on Composite Interfaces, Zichron Yaacov, Israel, May 5-8, 1996.

C17   Pegoretti A, Detassis M, Migliaresi C, Wagner H D. Thermal residual stresses in single fiber polymer composites. 6^th International Conference on Composite Interfaces, Zichron Yaacov, Israel, May 5-8, 1996.

C16   Pegoretti A and DiBenedetto A T. The measurement of fracture energy at fiber-matrix interfaces. 19^th Annual Meeting of The Adhesion Society, Myrtle Beach, South Carolina, USA, February 18-21, 1996, pp. 70-74.

C15   Marchi A, Pegoretti A, Ricco T. Anisotropic fracture behaviour in polypropylene thermoformed products. 4^th European Conference on Advanced Materials and Processes, Padua/Venice, Italy, September 25-28, 1995, pp. 655-658.

C14   Fambri L, Pegoretti A, Gleria M, Minto F. Modification of polyphosphazene properties through light-induced grafting reactions. 4^th European Conference on Advanced Materials and Processes Padua/Venice, Italy, September 25-28, 1995, pp. 217-222.

C13   Fambri L, Pegoretti A, Mazzurana M, Migliaresi C. Poly-L-lactic acid fibers produced by solution spinning: characterization and in vitro degradation. 11^th European Conference on Biomaterials, Pisa, Italy, September 10-14, 1994, pp. 64-67.

C12   Migliaresi C, Pegoretti A, Fambri L, Incardona S D, Mazzurana M, Fenner R. The preparation and characterization of PLLA derived biodegradable fibers. 2^nd World Congress of Biomechanics, Amsterdam, The Netherlands, July 10-15, 1994.

C11   Minto F, Gleria M, Fambri L, Pegoretti A. Light induced grafting reactions of polyacrylic acid, polymethacrylic acid and poly-4-vinylpyridine onto poly[bis(4-benzylphenoxy) phosphazene]. 6^th International Conference on Polymer supported reactions in Organic Chemistry (POC94), Venice, Italy, June 19-23, 1994, pp. 76-77.

C10   Pegoretti A, Detassis M, Migliaresi C. Stress transfer in carbon-epoxy single fiber composites: effect of temperature and strain rate. 8^th CIMTEC, Florence, Italy, June 28 July 4 1994.

C9     Migliaresi C, Fambri L, Pegoretti A, Incardona S D, Mazzurana M, Fenner R. High strength poly-L-lactic acid fibers produced by melt and solution spinning. 20^th Annual Meeting of the Society for Biomaterials, Boston, MA, USA, April 5-9, 1994, p. 246.

C8     Della Volpe C, DiMaggio R, Fambri L, Pegoretti A, and Migliaresi C. An application of FFT to the analysis of data from the Wilhelmy microbalance, Interfacial Phenomena in Composite Materials IPCM 93, Cambridge, UK, September 13-15, 1993, p. 65.

C7     Della Volpe C, Fambri L, Pegoretti A, Fenner R, and Migliaresi C. Effect of air plasma treatment on polyethylene fiber/epoxy resin adhesion: dynamic contact angle and interfacial shear strength measurements. Interfacial Phenomena in Composite Materials IPCM 93, Cambridge, UK, September 13 - 15, 1993, p. 91.

C6     Pegoretti A, Penati A, Kolarik J. Effect of polyurethane hydrolysis in water on molar mass and thermal properties. J. MED. C.A.T. 93, Corte, France, September 12 - 16, 1993, pp. 347-350.

C5     Fambri L, Migliaresi C, and Pegoretti A. Fabrication and in vitro degradation of polylactic acids, The Second International Minisymposium on Polymeric Materials, Richmond, VA, USA July 6, 1993.

C4     Fambri L, Pegoretti A, Incardona S D, Fenner R, Migliaresi C. Poly-L-lactic acid fibers produced by melt spinning: characterization and in vitro degradation, Gordon Research Conference on Polymers, Henneker, NH, USA, June 27 - July 2, 1993.

C3     Pegoretti A, Incardona S D, Fambri L, Migliaresi C. Preparation and characterization of biodegradable poly-L-lactic acid fibers. International Conference on Materials for Biomedical Applications, Capri, Italy, June 6-11, 1993, p. 55.

C2     Guzman L, Elena M, Kothari D C, Scotoni I, Miotello A, Pegoretti A. Effects of nitrogen ion implantation on the wear resistance of cemented tungsten carbide and other ceramic tool materials. Second International Conference on Advanced Manufacturing System and Technology, AMST '90, Trento, Italy, June 1990, pp. 175-181.

C1     Doltsinis St, Marchese M, Manini L, Jacucci G, Contro R, Pegoretti A, Zuliani F. Computer simulation of an industrial forming process: three dimensional hot rolling of wire rods. Second International Conference on Advanced Manufacturing System and Technology, AMST '90, Trento, Italy, June 1990, pp. 276-287.

Manuscripts on proceedings of Italian national conferences:

D73   Pegoretti A, Giusti G, Dorigato A, Messori M, Bondioli F. Memoria di forma elettroattivata di compositi polimerici contenenti nanocariche conduttive. XI Convegno Nazionale AIMAT, 16 – 19 Settembre 2012, Gaeta (LT), Italia, pp. 411-414, ISBN 978-88-97930-037.

D72   Dorigato A, Brazzo S, Pegoretti A. Nanocompositi a memoria di forma a base di policicloottene. XI Convegno Nazionale AIMAT, 16 – 19 Settembre 2012, Gaeta (LT), Italia, pp. 209-212, ISBN 978-88-97930-037.

D71     Dorigato A, Pegoretti A. Processing effects on polyolefin/fumed silica nanocomposites. XI Convegno Nazionale INSTM, 30 Giugno - 2 Luglio 2013, Bari, Italia, SO02.

D70   Pedrazzoli D, Pegoretti A. Adesione fibra-matrice in compositi polipropilene/vetro nanomodificati. II Convegno Nazionale Assocompositi, 29-31 Maggio 2012 Torino, Italia.

D69   Pedrazzoli D, Dorigato A, Pegoretti A. Monitoraggio del comportamento a creep di compositi strutturali epossidica/vetro mediante misure di conducibilità elettrica. II Convegno Nazionale Assocompositi, 29-31 Maggio 2012 Torino, Italia.

D68   Dorigato A, Svarca R, Pegoretti A. Compositi autorinforzati a base di polivinilalcool. Convegno Nazionale della Society of Plastics Engineers – iTec 2012, 9-10 Maggio 2012 Milano, Italia.

D67   Medeiros Araujo T, Pegoretti A. Preparation and characterization of liquid crystalline single-polymer short-fibres composites. XX Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 4 – 8 Settembre 2011, Terni, Italia, pp. 537-540, ISBN 978-88-95028-83-5.

D66   Dorigato A, Debortoli A, Pegoretti A. Comportamento a fatica ed impatto di compositi strutturali a base di fibre di basalto. I Convegno Nazionale Assocompositi, 24-25 Maggio 2011 Milano, Italia.

D65   Dorigato A, Pegoretti A, Dzenis Y, Penati A. Effetto dell’aggregazione delle nanocariche sul comportamento elastico di nanocompositi particellari a matrice poliolefinica. X Congresso Nazionale AIMAT, 5 – 8 Settembre 2010, Capo Vaticano (VV), Italia, pp. 265-268, ISBN 978-88-7458-114-6.

D64   Fambri L, Pegoretti A, Dorigato A, Sebastiani M. Utilizzo di silice piogenica per la produzione di nano compositi a matrice degradabile. X Congresso Nazionale AIMAT, 5 – 8 Settembre 2010, Capo Vaticano (VV), Italia, pp. 277-280, ISBN 978-88-7458-114-6.

D63   Sebastiani M, Dorigato A, Pegoretti A, Fambri L. Nanocompositi biodegradabili per applicazioni industriali. 1° Congresso Nazionale sugli imballaggi in polimeri biodegradabili (BIOPOLPACK) 15-16 Aprile 2010, Parma, Italia.

D62   D’Amato A, Dorigato A, Pegoretti A, Fambri L. Nanofilled HDPE fibers. Effect of pyrogenic nanosilica on spinnability and drawing. NANOITALTEX 2009 Innovazioni e tecnologie emergenti per il tessile, 10-11 Novembre 2009, Milano, Italia.

D61   Pegoretti A. Matrici avanzate per compositi polimerici. COMPOTEC 2009, 21 – 23 Ottobre 2009, Marina di Carrara, Italia.

D60   Dorigato A, Pegoretti A, Penati A. Rheological behaviour of linear low density polyethylene (LLDPE)-silica micro and nanocomposites. XIX Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 13 – 17 Settembre 2009, Milano, Italia, pp. 4.48-4.49.

D59   Dorigato A, Pegoretti A, Penati A. Comportamento a creep di nanocompositi LLDPE-silice. IX Congresso Nazionale AIMAT, 29 Giugno - 2 Luglio 2008, Piano di Sorrento (NA), Italia, su CD-ROM.

D58   Bondioli F, Dorigato A, Fabbri P, Messori M, Pegoretti A. Polietilene ad alta densità (HDPE) rinforzato con titania e zirconia. IX Congresso Nazionale AIMAT, 29 Giugno - 2 Luglio 2008, Piano di Sorrento (NA), Italia, su CD-ROM.

D57   Dorigato A, Pegoretti A, Messori M, Fabbri P. Viscoelastic and fracture behaviour of HDPE – TiO₂ micro- and nanocomposites. VII Convegno Nazionale INSTM, 9 - 12 Giugno 2007, Tirrenia, Italia, C41.

D56   Dorigato A, Pegoretti A, Penati A. Fracture behaviour of linear low density polyethylene (LLDPE) – silica nanocomposites. XVIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 16 – 20 Settembre 2007, Catania, Italia, pp. 199-200.

D55   Bondioli F, Dorigato A, Fabbri, P, Messori M, Pegoretti A. High density polyethylene reinforced with titania nanoparticles. XVIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 16 – 20 Settembre 2007, Catania, Italia, pp. 175-176.

D54   Traina M, Pegoretti A, Penati A. Polyethylene-carbon black nanocomposites: mechanical response under creep and dynamic loading conditions. VI Convegno Nazionale INSTM, 12 - 15 Giugno 2007, Perugia, Italia, CO19.

D53   Dorigato A, Pegoretti A, Penati A. Filler-matrix interactions in polyurethane-clay nanocomposites. VIII Congresso Nazionale AIMAT, 27 Giugno - 1 Luglio 2006, Palermo, Italia, su CD-ROM.

D52   Traina S, Pegoretti A, Penati A. Fracture behaviour of high density polyethylene – carbon black composites evaluated by the essential work of fracture approach. VIII Congresso Nazionale AIMAT, 27 Giugno - 1 Luglio 2006, Palermo, Italia, su CD-ROM.

D51   Pegoretti A, Zanolli A, Migliaresi C. New single-polymer composites from liquid crystalline fibers. V Convegno Nazionale INSTM, 26 - 29 Settembre 2005, Geremeas - Maracalagonis (Cagliari), Italia, F12, su CD ROM.

D50   Pegoretti A, Marchel A, Penati A. Effect of recycling on the thermo-mechanical behaviour of high impact polystyrene. V Convegno Nazionale INSTM, 26 - 29 Settembre 2005, Geremeas - Maracalagonis (Cagliari), Italia, F11, su CD ROM.

D49   Traina M, Pegoretti A, Penati A. Processing and electrical conductivity of high density polyethylene – carbon black composites. XVII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 11-13 Settembre 2005, Napoli, Italia, pp. 259-260.

D48   Preghenella M, Pegoretti A, Migliaresi C. Fumed silica-epoxy resin nanocomposites: AFaM and thermo-mechanical characterization. VII Congresso Nazionale AIMAT, 29 Giugno - 2 Luglio 2004, Ancona, Italia, su CD-ROM.

D47   Bertolini C, Migliaresi C, Pegoretti A. Development of shape-memory-alloys/epoxy functional composites. VII Congresso Nazionale AIMAT, 29 Giugno - 2 Luglio 2004, Ancona, Italia, su CD-ROM.

D46   Pandini S, Pegoretti A, Ricco T. Energy storage and dimensional recovery in highly deformed poly(butylene terephthalate). VII Congresso Nazionale AIMAT, 29 Giugno - 2 Luglio 2004, Ancona, Italia, su CD-ROM.

D45   Pandini S, Pegoretti A. Strain rate dependence of the anisotropic fracture toughness of rubber modified polypropylene films. XVII Congresso Nazionale del Gruppo Italiano Frattura (IGF17), 16-18 Giugno 2004, Bologna, Italia, su CD-ROM.

D44   Pegoretti A, Ricco T. Rate and temperature effects on the plane stress essential work of fracture parameters. Giornata di Studio IGF Frattura di polimeri, adesivi e compositi a matrice polimerica 7 Novembre 2003, Politecnico di Milano, Italia.

D43   Pegoretti A, Bonafini S, Gottardi G, Penati A. Hygrothermal degradation of short glass fibres reinforced poly(ethylene-terephthalate) from recycled bottles. XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 22-25 Settembre 2003, Pisa, Italia, pp. 423-424.

D42   Preghenella M, Pegoretti A, Migliaresi C. Mechanical, thermal and atomic force acoustic microscopy characterization of epoxy resin filled with silica nanoparticles. XVI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 22-25 Settembre 2003, Pisa, Italia, pp. 201-202.

D41   Grossi A, Fabbri B, Pegoretti A, Penati A. Integrazione reversibile effettuata con resine epossidiche nel restauro delle maioliche. VI Congresso Nazionale AIMAT, 8-11 Settembre 2002, Modena, Italia, su CD-ROM.

D40   Pegoretti A, Gottardi G, Penati A. Comportamento termomeccanico di poli(etilen-tereftalato) da riciclo. VI Congresso Nazionale AIMAT, 8-11 Settembre 2002, Modena, Italia, su CD-ROM.

D39   Fambri L, Pegoretti A, Bortot D, Kolarik J, Penati A. Caratterizzazione fisico-meccanica di miscele di copolimero cicloolefinico (COC) e polipropilene. VI Congresso Nazionale AIMAT, 8-11 Settembre 2002, Modena, Italia, su CD-ROM.

D38   Fabbri E, Fabbri P, Messori M, Pilati F, Pegoretti A. Ibridizzazione di compositi vetro/vinilestere con tessuti di PVOH. VI Congresso Nazionale AIMAT, 8-11 Settembre 2002, Modena, Italia, su CD-ROM.

D37   Fambri L, Ricco T, Pegoretti A, Bortot D, Goberti P, Penati A. Comportamento a frattura di miscele di copolimero cicloolefinico e polipropilene. XV Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 24-27 Settembre 2001, Trieste, Italia, su CD-ROM.

D36   Pegoretti A, Ricco T. Effetti viscoelastici sul comportamento a frattura di film di polietilentereftalato. XV Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 24-27 Settembre 2001, Trieste, Italia, su CD-ROM.

D35   Fontanari V, Pegoretti A, Tassan M. Relazione tra proprietà viscoelastiche dell’adesivo e comportamento a creep di giunti incollati. XXX Convegno Nazionale dell’Associazione Italiana per l’Analisi delle Sollecitazioni AIAS, 12-15 Settembre 2001, Alghero (SS), Italia, Vol. 1 pp. 519-529.

D34   Pegoretti A, Fiber-matrix load transfer in polymer composite materials. III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali 18-20 Giugno 2001, Trento, Italia, 13.

D33   Ricco T, Pegoretti A, Casagranda A. Strain rate and temperature dependence of fracture toughness in a PET film: approach of the essential work of fracture. III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali 18-20 Giugno 2001, Trento, Italia, B52.

D32   Fambri L, Kolarik J, Pegoretti A, Bortot D. Penati A. Physical and mechanical characterization of cycloolefin copolymer (COC) - polypropylene blends. III Convegno Nazionale sulla Scienza e Tecnologia dei Materiali 18-20 Giugno 2001, Trento, Italia, B38.

D31   Fambri L, Pegoretti A, Penati A, Kolarik J. Proprietà meccaniche di miscele polipropilene tenacizzato e copolimero stirene-acrilonitrile. V Congresso Nazionale AIMAT, 17-21 Luglio 2000, Spoleto, Italia, pp. 727-730.

D30   Pegoretti A, Migliaresi C, Ricco T. La natura della deformazione nei polimeri semicristallini. V Congresso Nazionale AIMAT, 17-21 Luglio 2000, Spoleto, Italia, pp. 795-798.

D29   Pegoretti A, Ricco T. Interazione tra processi di fatica e di creep nella frattura di compositi a fibra corta in condizioni di carico ciclico. XV Convegno Nazionale Gruppo Italiano Frattura IGF15, 3-5 Maggio 2000, Bari, Italia pp. 243-250.

D28   Pegoretti A, Guardini A, Migliaresi C, Ricco T. Studio del comportamento alle elevate deformazioni di polimeri semicristallini: il polibutilentereftalato. II Convegno Nazionale sulla Scienza e sulla Tecnologia dei Materiali, 14-16 Ottobre 1999, Acireale, Italia, B4. Centro Stampa 2 P srl:Firenze e Pontassieve.

D27   Pegoretti A, Fambri L, Menapace C, Migliaresi C. Caratterizzazione di un composito per la realizzazione di ponti in odontoiatria. Congresso Biomateriali 1999 ed. C.Piconi – ENEA (Roma), ISBN 88-8286-073-6, pp. 307-312.

D26   Pilati F, Fabbri E, Migliaresi C, Pegoretti A. Compositi ibridi rinforzati con tessuti di vetro e/o di polivinilalcol. XIV Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 13-16 Settembre 1999, Salerno, Italia, pp. 1015-1018.

D25   Pilati F, Fabbri E, Migliaresi C, Pegoretti A. Compositi rinforzati con fibre di vetro e/o di polivinilalcol. XIV Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 13-16 Settembre 1999, Salerno, Italia, pp. 977-980.

D24   Fambri L, Minto F, Pegoretti A, Gleria M. Processi di mescola e di innesto tra poli(etilene ossido) ed un copolimero fosfazenico sostituito con gruppi (4-benzoilfenossi)~0.5 e (metossietossi)~0.5. XIV Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 13-16 Settembre 1999, Salerno, Italia, pp. 497-500.

D23   Pegoretti A, Guardini A, Migliaresi C, Ricco T. Recupero delle deformazioni post-snervamento in tecnopolimeri semicristallini. XXVIII Convegno Nazionale dell’Associazione Italiana per l’Analisi delle Sollecitazioni AIAS’99, 8-11 Settembre 1999, Vicenza , Italia, SGEditoriali Padova– ISBN 88-86281-41-2, pp. 719-726

D22   Zappini G, Pegoretti A, Bianchetti M, Fambri L. Nuovo perno endodontico in materiale composito. Congresso SIB, Parma, 20 Novembre 1998.

D21   Ricco T, Pegoretti A, Tecchiolli A. Comportamento dinamico non lineare di sistemi elastomerici per pneumatici di vetture da competizione. IV Congresso Nazionale AIMAT, 8-11 Giugno 1998, Cagliari, Italia, PTM Editrice- Mogoro, Cagliari, Vol. 2, pp. 685-692.

D20   Pegoretti A, Migliaresi C, DiBenedetto A T. Studio dell'adesione fibra-matrice in compositi nylon-6 / fibre di vetro. IV Congresso Nazionale AIMAT, 8-11 Giugno 1998, Cagliari, Italia, PTM Editrice- Mogoro, Cagliari, Vol. 2, pp. 710-717.

D19   Pegoretti A, Migliaresi C, DiBenedetto A T. Danneggiamento e meccanica della frattura all’interfaccia fibra-matrice in materiali compositi. XIV Convegno Nazionale Gruppo Italiano Frattura IGF14, 27-28 Maggio 1998, Trento, Italia su CD-ROM.

D18   Fambri L, Minto F, Gleria M, Pegoretti A. Grafting reactions of poly(methacrylic acid) and poly(acrylic acid) onto poly(organophosphazenes). XIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 21 - 25 Settembre 1997, Genova, Italia, pp. 749-752.

D17   Fambri L, Pegoretti A, Penati A, Kolarik J. Confronto della resistenza all’idrolisi di elastomeri poliuretanici a base di poliestere e polietere. XIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 21 - 25 Settembre 1997, Genova, Italia, Bruzzone Arti Grafiche, Genova, pp. 603-606.

D16   Pegoretti A, Purrello L, Ricco T. Resistenza a frattura sotto carico ciclico di polipropilene rinforzato con fibre di vetro. XIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 21 - 25 Settembre 1997, Genova, Italia, Bruzzone Arti Grafiche, Genova, pp. 551-554.

D15   Pegoretti A, Purrello L, Ricco T. Effetto della frequenza sulla resistenza a fatica di compositi polipropilene/ fibra di vetro. XIII Convegno Nazionale del Gruppo Italiano Frattura IGF13, 27-28 Maggio 1997, Cassino, Italia, Tipografia Esagrafica s.r.l.:Roma, pp. 262-267.

D14   Pegoretti A, Migliaresi C, Accorsi M L, DiBenedetto A T. Resistenza a frattura dell'interfaccia fibra-matrice in materiali compositi polimerici. III Congresso Nazionale AIMAT, Omaggio Scientifico a R.Sersale, 25-27 Settembre 1996, Napoli, Italia, De Frede, Napoli, pp. 681-687.

D13   Pegoretti A, Marchi A, Ricco T. Resistenza meccanica  di materiali polimerici anisotropi: un approcio di meccanica della frattura elasto-plastica. III Congresso Nazionale AIMAT, Omaggio Scientifico a R.Sersale, 25-27 Settembre 1996, Napoli, Italia, De Frede, Napoli, pp. 560-566.

D12   Fambri L, Pegoretti A, Gleria M, Minto F. Thermal and mechanical properties of polyphospazene materials. I Seminario Nazionale "Ciclo e polifosfazeni", 15-16 Febbraio 1996, Padova, Italia, pp. C19 1-4.

D11   Filippini P, Bianchetti M, Pegoretti A, Fambri L. Valutazione microscopica del margine di chiusura tra moncone ed impianto in titanio per uso odontoiatrico tipo Screw-vent. III Convegno Italiano del Gruppo Interdivisionale Biomateriali (SCI), 2-4 Ottobre 1995, Bari, Italia.

D10   Fambri L, Pegoretti A, Gleria M, and Minto F. Light-induced grafting of organic polymers onto poly(organophosphazenes): a way to phosphazene properties modification. XII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 19-22 settembre 1995, Palermo, Italia, pp. 505-508.

D9     Marchi A, Pegoretti A, Casagranda A, Ricco T. Infragilimento anisotropico indotto dal processo di termoformatura in prodotti a base di polipropilene. XI Convegno Nazionale Gruppo Italiano Frattura IGF11, 4-6 Luglio 1995, Brescia, Italia Copy&Foto, Milano p. 257.

D8     Pegoretti A, Fambri L, Kolarik J, Penati A. Studio della resistenza all'idrolisi di elastomeri poliuretanici per applicazioni industriali. II Convegno Nazionale AIMAT, 19-21 Settembre 1994, Trento, Italia, pp. 349-356.

D7     Pegoretti A, Detassis M, Migliaresi C. Effetto della temperatura sull'adesione fibra-matrice in microcompositi resina epossidica/fibre di carbonio. II Convegno Nazionale Convegno AIMAT, 19-21 Settembre 1994, Trento, Italia, pp. 271-278.

D6     Fambri L, Pegoretti A, Fenner R, Incardona S D, Mazzurana M, Migliaresi C. Fibre biodegradabili in acido poli-L-lattico. Produzione, caratterizzazione e degradazione in vitro. II Convegno Nazionale Convegno AIMAT, 19-21 Settembre 1994, Trento, Italia, pp. 181-188.

D5     Fenner R, Pegoretti A, DeLollis A, Fambri L. Influenza delle condizioni di processo sulla degradazione in vitro di fibre di poliesteri. I Convegno Italiano del Gruppo Interdivisionale Biomateriali (SCI), 15-16 Ottobre, 1993 Trento, Italia, P12.

D4     Fambri L, Fenner R, Pegoretti A, Grimaldi M, Migliaresi C. Ottimizzazione del processo di stampaggio di acido polilattico. I Convegno Italiano del Gruppo Interdivisionale Biomateriali (SCI), 15-16 Ottobre 1993, Trento, Italia, P10.

D3     Pegoretti A, Incardona S D, Fenner R, Fambri L, Migliaresi C. Produzione di fibre biodegradabili in acido poli-L-lattico mediante filatura da soluzione. I Convegno Italiano del Gruppo Interdivisionale Biomateriali (SCI), 5-16 Ottobre 1993, Trento, Italia, P9.

D2     Pegoretti A, Incardona S D, Fenner R, Fambri L, Migliaresi C. Produzione di fibre biodegradabili in acido poli-L-lattico mediante filatura da fuso. I Convegno Italiano del Gruppo Interdivisionale Biomateriali (SCI), 15-16 Ottobre 1993, Trento, Italia, C11.

D1     Pegoretti A, Penati A, Kolarik J. Resistenza all'idrolisi di elastomeri poliuretanici. XI Convegno Italiano di Scienza e Tecnologia delle Macromolecole, 27 - 30 Settembre 1993, Torino, Italia, pp. 312-315.